I replaced my dell battery. All volts ect were exactly the same. Worked fine for a month or so. Now the indicator says bat has 100% charge (if I remove bat the indicator says “no battery, reinstall and says 100% charge) but when I remove power cord computer does not work on battery.
Welcome to SF
What model computer do you have?
This will help in the diagnostics.
Last edited by wally1324; 07 May 2011 at 10:02.
Thank you,
It is a Dell Latitude D600
does the batterie have one of the following serial numbers
1K055
C5446
F2100
KD494
W5915
Y1333
3K590
C6269
F5132
OR331
X5308
Y4500
5P474
C6270
GD785 M3006 X5329
Y5466
6P922
D2961
H3191
RD857 X5332 OU091*
C2603 D5555 J1524 TD349
X5333
W1436*
C5339
D6024
JD616
U5867
X5875
C5340 D6025 JD617
U5882
X5877
I don’t think so.
There are 2 bar codes with #’s under them.
LP0210062401M002278
100623003
model # DL1194L7
Ok because the serial numbers that were above were recaled by dell so you would just get a new one.
Do you have the drivers and programs disk that came with the computer because it has a diagnostic tool that allows you to check your battery and it will run a series of tests.
If you have the disk insert it and shut down then when you turn it on hold the C key and it will boot into the diagnostic program to check for battery life
Unfortunately I don’t have any disc. I bought this used a couple years ago.
Quote