Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Sata 3 Cables

22 May 2011   #61

Windows 7 Ultimate x86

Whatever. My point is: the less bending and twisting, the better.

My System SpecsSystem Spec

 Sata 3 Cables

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
FYI Only - Discovered only slight diff betw SATA-1 vs. SATA-3 cables
I read an article stating there’s very little difference between SATA cables. So I tried it for myself. This screenshot shows the slight differences in speed; likely most of you already knew this. In testing, an 11GB file transferred in 10 seconds using either cable. Vid link shows detail of...
Hardware & Devices
LONG SATA cables needed [ok, wanted]
My server is a Frankenstine computer. MOST parts have been swapped out at one time or another. The last upgrade to the machine was a good old fashioned cleaning, and case swap from a mini tower to a full tower. ALL the drive bays that are within reach of the cables are used, but I have a few...
Hardware & Devices
External Sata Cables
I have been searching for external sata cables with latches. The only ones I can find with latches are internal (Type L). The external should be type "I" both ends. Does any one have a link for external latched cables?
Hardware & Devices
External Sata Cables
Some of the plugs are listed as "I type" and some as "L type". What is the difference? I am trying to figure out what I need from rear port to dock.
Hardware & Devices
latchling sata cables compatibilty
hi all. how can i tell if my mobo(gigabyte 880ga-ud3h rev3.1) is compatible with the latchling type sata cables? sorry if its a dumb question lol. are all new boards compatible with them? thnks in advance folks:doh:
Installation & Setup
Can hot-plug-in and out SATA cables from mobo during run?
Can I arbitrarily plug in and out SATA cables (coming from DVD and (external) hard disc) into and from SATA slots on the motherboard? or does this cause hardware damages? Are thesDVD and external hard discs detected automatically by Win7 or do I have to click somewhere "refresh" ? Peter
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 22:22.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App