Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Code 43 error on Samsung Printer

22 May 2011   #1
SpencerWaldron

64bit
 
 
Code 43 error on Samsung Printer

Hi,

OK, I have a Dell Vostro laptop running windows 7 64bit. Up until a week ago all was workinh fine and has been for some time. Then my printer stopped being recognized and Windows reported it was due to code 43. I've tried the normal options - unistall universal bus controllers, take laptop battery out etc but nothing fixes it.

Any other ideas?


My System SpecsSystem Spec
.

22 May 2011   #2
fireberd

Windows 7, 64 bit Home SP1, Win 8.1.1 Pro 64 bit
 
 

It would appear to be a problem with the Samsung Printer, according to what Microsoft says about the error:

Code 43
Windows has stopped this device because it has reported problems. (Code 43)


Recommended resolution

One of the drivers controlling the device notified the operating system that the device failed in some manner.

If you have already run the Troubleshooting Wizard, you might want to check the hardware documentation for more information about diagnosing the problem.
My System SpecsSystem Spec
22 May 2011   #3
SpencerWaldron

64bit
 
 

Hi,

thanks. I have tried a lot of things with the drivers. updated, uninstall then install again etc but still nothing works... I am beginning to think I will need to try replacing the USB cable and then my last hope is a problem with the printer itself. I don't think its a Win 7 problem if all was well for months leading up to last week. Something has malfunctioned... hardware or software... not sure which!
My System SpecsSystem Spec
.


22 May 2011   #4
gazz9496

 
 

uninstall and run a check disk, the device is likely not a fault in any way at all, but a code 43 is a usb error that can often be resolved by uninstalling the device drivers completly using driver sweeper to clean up after and performing a full check disk to fix any file system errors which have probably occured to give this error.
My System SpecsSystem Spec
Reply

 Code 43 error on Samsung Printer




Thread Tools





Similar help and support threads
Thread Forum
It's not the printer, it's the network (Error code 0x80070035)
I'm moving http://www.sevenforums.com/network-sharing/209320-laptop-can-no-longer-access-shared-printer-files-home-network.html here, simply because the issue is not printer related; it's network-related, and I wanted to get the problem updated under a better title. In a nutshell: Win7...
Network & Sharing
Printer error code 43 in device manager
Hi, I have an issue with an HP deskjet D4363. It worked just fine when I bought it in November and then just stopped.... At first it would print 3 or 4 lines and then freeze. Now it does nothing and isn't even recognised by windows as a printer... I have a code 43 error unrecognised device in my...
Hardware & Devices
Samsung SCX-3205W printer and WPS
Samsung SCX-3205W printer and WPS. According to Samsung getting this printer and my system to communicate should be simplicity. Unfortunately the manual and instructions leave much to be desired. I have an Asus P7H55-M Pro connected to a D-Link DIR-655. I want to install the printer downstairs so...
Hardware & Devices
How to Update Printer Driver (Samsung CLP-300)
Can someone for the life of me please explain how i go about updating the driver as the default one seems to print graphics realy badly, compared to what the printer is capable off. I have tried going to device manager, its not listed or im pretty sure its not. i have tried going to the...
Drivers
Looking for Samsung ML-1710 Printer Driver
Unfortunately driver from Vista x64 Ultimate doesn't work... Samsung Universal Printer Driver too... any ideas?
Drivers
Samsung ML-1510 700 Laser Printer
Thought it might be of interest for anyone else with this 5 year old printer to know that on my system it works with XP drivers (downloaded from the Samsung site) but NOT Vista drivers. Right-click on the driver file, select Troubleshoot Compatability, and follow the instructions. Cheers ...
Drivers

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App