New
#11
you could wait for it to appear again it may happen, but I still say it is at best, on its way out
If you want to be certain try it in another PC.
you could wait for it to appear again it may happen, but I still say it is at best, on its way out
If you want to be certain try it in another PC.
Do you have a velociRaptor HD? Your specs show as ATA. Are you sure it's not SATA? The model# could help in determining that. Is the drive in warranty?I downloaded some app from here
WD Support / Downloads / SATA & SAS / WD VelociRaptor
And all it told was "There were errors that we can't repair, contact support. (error 08)"
The HD is failing or failed. Your main priority should be saving your data. First, if the drive is in warranty, you should contact WD to see if they can help you save your data before RMAing the drive.
Here are two other ways you can try, but again, if the drive is in warranty, contact wd support before anything else.
Hard Disk dropping
Try the Windows Recovery Console method first (link in earlier post). If Windows Recovery Console can't see it, you can try the Linux Live CD, which is a bootable CD.
Here is a link to a Linux Live CD download. Scrolling down will reveal a step by step tutorial in downloading, burning and using the Linux Live CD:
Download | Ubuntu
The Linux method should be tried if the Windows method fails. Here is a link to an indepth tutorial on how to use it to save your data:
Use Ubuntu Live CD to Backup Files from Your Dead Windows Computer - How-To Geek
Again, if your drive is in warranty, contact WD support before anything else.
James
Device properties shows this: WDC WD5000AAKS-07YGA0 ATA Device
Warranty is gone ages ago (I rebuilt PC and kept old HD:s)
I was thinking about that Ubuntu too.. But if even BIOS can't see it I don't know how Ubuntu would.. :)
And I can't backup disk I can't see.. But maybe I should try in other PC.
You should follow the steps listed in my previous posts, starting with Windows Recovery Console.
You don't mention the symptoms, but sometimes mechanical issues with a drive can cause it to overheat.
1. Try shutting the system down for an hour.
2. When time is up, restart the system and enter the bios. Is the drive present?
3. Regardless of whether it is or not, make sure that your CD/DVD drive is listed first in the boot priority list so that you can boot from it (this will not prevent booting from your system drive, but will check the DVD drive first for a boot CD)
Try the Windows Recovery method. Does it see the drive? If not, there is an old trick that may help:
1. Try removing the problem drive, wrap it in a cloth, place it in a ziplock, then place it in the freezer for 2 hours.
2. Remove it from the freezer and bag, make sure there is no condensation on the drive (if so, wait a few minutes for evaporataion).
3. Place it back in the system and immediately try WR. If that fails, try the Linux method.
If the drive shows up, You will need to immediately try to save your data while you can see it. Don't boot into windows, don't waste time. Data recovery is the priority.
If none of this works, you may be able to see it in another machine.
James
It's already been discussed, that this drive may really be an ex-HDD.
But if you haven't already tried it you might connecting the SATA cable to a different SATA connector on the motherboard, removing the power and data cables at both ends (i.e. to both board and power supply, as well as to the drive) and re-connecting the cables making sure that both ends are firmly seated, and replacing the SATA cable itself.
But if the drive is gone, it's gone. Time for a replacement, unfortunately.
Incidentally, I had a virtually identical story myself. No great insight here, other than that I actually DID finally decide after trying all of the above suggestions to eliminate the intermittent failure, that it was the drive.
So I replaced it and the problem disappeared! I was convinced it was a defective old drive.
Well everything was perfect for a few weeks, when it started happening again!! I now realized it probably wasn't the old drive (which was probably fine, after all), but just something about the other variables in the story. Again, I changed to yet another SATA connector on the motherboard but still no change. Swapped to a new SATA cable and magically it fixed itself. Once again, stability returned... and hasn't failed since.
So it took one new drive, three different SATA connectors, and two SATA cables, to finally find what (fingers crossed) is stability again.
You mean I should replace my cable with SATA 2 or ?
Ok.. After I today woke up my computer it found my disk again O_o
But now it says "You need to format the disk in drive D: before you can use it."
Should I format it or ignore and see if it returns normal soon?
"format" message looks like this..
I don't know should I pass it and do that format actually work :/
I'm using some sata I's on sata II and have not had any issues, but it would be advisable to try it, esp. since it takes minutes to try.You mean I should replace my cable with SATA 2 or ?
OK, I'm going to go out on a limb here and assume you don't care about the existing data on this drive. If you do, backtrack in this thread to employ the data rescue methods mentioned.Should I format it or ignore and see if it returns normal soon?
Beyond that, sata drives are so cheap these days:
Newegg.com - Internal Hard Drives
I would pick up another drive ( a 500GB is now less than $50) to put in the system. Given that the WD diag software states the drive has an irreparable error, there's no way I would trust this drive.
James