Windows 7 - EVENT ID 129 Reset to device, \Device\RaidPort1, was issued.

Hi

when i try to burned one dvd the system shoe me the error "Reset to device, \Device\RaidPort1, was issued."

Specificacion:
MB: MSI k9n sli platinium
chipset: NVIDIA® nForce 570 SLI MCP
MEM: 4 gigas
HD: 3 hard disk (2x80 gigas and 1 500 gigas) all in diferent port sata and without
particion
DVD BURN SAMSUNG
T.V. Nvidia 9800 GT 1 giga
CPU AMD X2 4000

in another computer with other specification and another dvd burn show me the next error

"An error was detected on device \Device\CdRom0 during a paging operation."
Specificacion:
MB: ELITEGROUP a7800GM
chipset: ATI
MEM: 2 gigas
HD: 1 hard disk (250 gigas) all in diferent port sata and without particion
CPU AMD X2 4000

i have windows 7 64 bit in both with full update and without service pak 1

So I've been having this issue as well, since I know how frustrating it is to have PC problems figure I'd report back with my findings

I was spending hours troubleshooting my raid array, drivers, etc...Turns out just by re-seating the sata cables/molex connectors on the mother board and the drives themselves solved the issue. I ran my PC for about 6 hours last night and no errors whereas before I used to get them every 15-20 seconds.

Hope this helps everyone!