Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: eSATA Harddrive doesn't always show up


23 Jul 2009   #1

Windows 7 Professional x64
 
 
eSATA Harddrive doesn't always show up

hi everybody

i have a 1TB WD My Book external harddrive and i recently upgraded from a USB connection to an eSATA connection (which, logically, increased read/write speeds a lot due to the faster connection) ...

in some part of my bios-post it checks for disks that can be used as raid and it discoveres my 2 IDE discs as well as this eSATA external drive.
so far so good.

but the problem is that Windows 7 sometimes discoveres the drive and sometimes not, even though the bios always discoveres it.
If i "look for new plug'n'play hardware" in the device manager it sometimes finds the harddrive and sometimes just freezes.
If it freezes ... nothing more happens (drive doesn't show up in OS)
If it finds it ... the OS still doesn't show me the drive.

If I need something from that drive (my games and apps are stored there) I need to reboot and hope it gets detected correctly.

It is really annoying because I don't want to revert back to USB (which connected always) due to the slower speeds... (i often copy big files onto that HD)...

Any ideas?


edit: please move to hardware&devices i clicked the wrong part of the forum

My System SpecsSystem Spec
.

23 Jul 2009   #2

 

Moved

Check to see if you have the latest BIOS< as well as motherboard drivers for your motherboard. Also, check to see if Windows 7 is trying to be helpful by not detecting the drive b/c it has the eSATA port asleep on boot up....
My System SpecsSystem Spec
23 Jul 2009   #3

Windows 7 Professional x64
 
 

i don't use the newest bios and i will not, had only problems with that.
(i run my Q6600 @ 8x400mhz with 1.3375v) and after updating bios, resetting the settings and redoing my OC it didn't even post.... i then upped the voltage to about 1.4 or 1.42 (something liek that, don't remember) and it worked again but then i decided to downgrade my bios because Q6600 produced a lot of heat more (5-7C idle more...)

will look into bios for sleep mode of eSATA ports

ah and i use the cool'n'quiet to manage the speed of my cpu fan from bios (if not it turns with 2700rpm and is _really_ loud) and this didn't work either with most of the newer bioses...
My System SpecsSystem Spec
.


23 Jul 2009   #4

 

I can understand. 'gratz on getting your CPU to 3600 - mine hits a brick wall at anything above 3200, and it wants the voltage at 1.4+/- even at that....

However, a driver issues sounds like the primary culprit, followed by a possible PSU issue in not supplying enough power to the eSATA port.
My System SpecsSystem Spec
23 Jul 2009   #5

Windows 7 Professional x64
 
 

nono my cpu is @3200 ... for 3600 i need at least 1.48v (didn't test thoroughly at this setting though) else it may load Windows 7 or not ...
hmm maybe it's the psu i do have a lot of harddisks connected...
still looking through bios ... it has a lot of options ...

changed back to IDE mode on eSATA controller (i thought i set SATA to AHCI but i set eSATA to this so it may be that...)
now it shows up but sadly this doesn't prove anything ... sometimes it did show up while using the AHCI setting as well
My System SpecsSystem Spec
23 Jul 2009   #6

Win7 Build 7600 x86
 
 

Hi Tyderion,

Overclocking to the max stresses your hardware and especially the capacitors and regulators which are supposed to keep your power stable.

John pointed you in the rigth direction of the powersupply being culprit.

Maybe it's not a shortage of power but a very dirty powersignal.

You can compare it with distortion of a guitar amp. By raising the stress on your capacitors and electronics they start distorting the power signal.

This could well explain why it sometimes works, and sometimes not.

Try downclocking a bit.

There isn't much real world speed to be gained anyway. It maybe 4 or 5 %.

Plus the lifespan of all your hardware is cut in half.

good luck
My System SpecsSystem Spec
23 Jul 2009   #7

Windows 7 Professional x64
 
 

well ... the os reacts much faster with 3.2ghz instead of 2.4 so i'd like to keep it that way...

up to now it works with the IDE mode (dunno why i configured eSATA as AHCI ...) so if it remains working it's ok.
powersupply *should* be ok ... i don't use one of those new high-power-consumption-graphic cards ...
My System SpecsSystem Spec
23 Jul 2009   #8

 

Sorry, I misread - I see now your multiplier is 8 not 9 - 9 * 400 does yield 3600, which is what I thought it said.

Still, I have mine set to 9 * 360, giving me 3240 - I tried moving it up a bit and it goes stupid.

My RAM is rated at 1000 MHz, but if I use it at that setting then I have to tone down my FSB to ~357 - 360 is a much nicer, rounder number, so I leave the RAM at 800.

Anyhoo - I still think it is a PSU issue - I'd test the drive on another computer's eSATA port, or else disconnect some of your drives and see what happens - also, you might try loading BIOS defaults (in terms of removing the OC) and see if that makes a difference.

On my rig, I am using a 780W PSU - more than ample, until I take into account the dual GTX260s (also OCd), dual Seagate Barracudas with a single WD and a PATA DVD burner, plus all sorts of fans, USB internal AIO card reader, and all sorts of USB devices (MX Revolution, G15 Keyboard, Bluetooth dongle, dual iPAQ cradles, etc.) and I can understand why my CPU doesn't like going above 3200....
My System SpecsSystem Spec
23 Jul 2009   #9

Windows 7 Professional x64
 
 

yeah like i said i use a 8800GT which, afaik, uses a lot less power than those GTX260s or something similar.

btw. i have a question to ram:fsb ...
it does NOT give any performance increase if the RAM clock is faster than the FSB clock or does it NOT give a performance increase if it is more than double the speed?

e.g.
my FSB: 400 (=1600 because it is quadpumped)
so my ram should be either
800 mhz (=1600mhz effective)
or
400 mhz (=800 effective)
going faster than one of those to (i suspect the first option) does not increase performance because the fsb just can't keep up with the ram. though which one is it?
(effective = that what you select on motherboard and which is reported as final speed, like DDR3-1600)

i'm confused with the quadpumped/doublepumped etc.
which speeds should match up?
when OCed i use 400 fsb (faster fsb= faster system afaik, better increase then just increasing the multiplier) but if i increase more the voltage requirements go up extremely fast so i don't do that.

hope you understand this post it's become kinda messy

btw. ram is rated DDR3-1600 but because they're 4x1 i can't get to that speed. so would it make more sense decreasing FSB as my ram is causing a bottleneck because it runs slower than my fsb (it runs @640mhz (=1280) right now)

and again to cpu temps: my overclock causes my cpu to be about 4C warmer so i don't care that much


btw. my 8800GT is overclocked from 625mhzto 707 (while memory from 900 to 1030)

ok some more clarification (it IS messy :S):

in cpu-z there is the Bus Speed (400) and the Rated FSB (1600) as well as the memory clock (640mhz) (which gets doubled to 1280). should now the memspeed match up with the bus speed or should it be double the bus speed (which means Rated FSB and effective RAM speed match)?
My System SpecsSystem Spec
23 Jul 2009   #10

Windows 7 Ultimate x64
 
 

If your FSB is set at 400Mhz, with Intel quad pumped it would be 1600.
And since DDR2 ram is doubled...400Mhz would be 800.
My System SpecsSystem Spec
Reply

 eSATA Harddrive doesn't always show up




Thread Tools



Similar help and support threads for2: eSATA Harddrive doesn't always show up
Thread Forum
Solved PC doesn't show anything on screen Hardware & Devices
Seagate Harddrive test tool fail but harddrive data seems intact Hardware & Devices
Solved Windows 7 Doesn't Load from Harddrive or DVD BSOD Help and Support
esata doesn't work properly Hardware & Devices
ICS box doesn't show up Network & Sharing
HELP PLEASE... Taskbar doesn't show! General Discussion
HD doesn't show up Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:47 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33