Raid 0 Array

beastmaster said:

When I bought my PC 7 years ago, I asked the techs to create a Raid 0 array with my 2 200GB WD drives. Recently, I have been reading the comments here and on other forums to stay away from Raid arrays as they are more problems then they are worth.

What I want to know is what is the best way, and procedure to accomplish this, to remove this Raid 0 array and use my 2 200GB SATA drives as separate drives with the OS on one and data on the other. I will probably partition the OS one as I do not need 200GB for Windows 7.

Am I correct in assuming that once this RAID 0 array is broken, I will lose everything and will have to do a clean install of Windows 7 plus all my apps?

thanks

Backup all of your data, make sure that you have backed up all of your data. Remove the array configuration, get out your Windows DVD, reinstall the OS, patches, and all applications, copy your data back from your backup.

Yes, a Raid array can give you problems and it increases the risk of loosing everything. But if it worked for 7 years, I would guess it will be OK for a bit more time.

But if you decide to go without it, I suggest to use the second HDD for images so that you have a good backup.

whs said:

Yes, a Raid array can give you problems and it increases the risk of loosing everything. But if it worked for 7 years, I would guess it will be OK for a bit more time.

But if you decide to go without it, I suggest to use the second HDD for images so that you have a good backup.

Thanks, I will be storing all my backup images on the second drive for sure.

When I boot up, I see a screen that allows you to configure or view the array. I believe I have to press CTRL + I or something like that to get into it. Do I remove the array there or change a setting in the BIOS or both?

Also, can someone recommend a good external USB hard drive under $100.00? I do not want any preinstalled software like there is on the WD My Book Essentials.

One further question, if I use Windows 7 backup image as I usually do and backup my "C" drive to an external source before I remove the array, can I just restore that image to one of the drives after the array is gone?

I can't answer about the raid image as I have never used raid, but I would seriously doubt it.

As far as the external hard drive, the best way is to make your own. There is a thread on making your own hard drive that can give you some good ideas. I have several, but like this one best. The advantage is you can use it however you want and change out drives whenever you choose.

1. I think you just need to remove the array.

2. Here is a website where you can find external disks at good prices: Storage Devices Deals - Deals2buy.com You should also check the last entries of this thread: https://www.sevenforums.com/chillout-...deals-day.html

3. I do not think you can restore an array image to a single disk - but you can always try.

Also, with the external drives, don't worry about the programs they put on them. A reformat will usually get rid of them. Most of them are a waste anyway.

It is and much more flexible.