Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: RNX-EasyN1 Wifi Adaptor wont work.

20 Aug 2011   #1
Keebler Elf

Windows 7 64bit
 
 
RNX-EasyN1 Wifi Adaptor wont work.

Alright so I have a laptop however I am unable to use its current wifi card for my wifi reciever booster I am making. So I needed a usb connector. I got the RNX-EasyN1. When I first got it I installed the driver off the disk. However I was still unable to get the device to detect any networks or for that matter enable itself in the network connections screen. So I went to their site and got the latest driver. Still did not work. I spent a few hours searching google, reinstalling restarting, and in general doing anything that seemed like the normal procedure when I cant get something to work. Yet here I sit with a wireless adaptor that every one else on google says works perfectly fine, and it wont work for me. Help please.


My System SpecsSystem Spec
.

25 Aug 2011   #2
wally1324

Windows 7 Professional x64 Sp1
 
 

you can try to manually put the network info in.

or it sounds like you got a defective card you may want to return it and get a new one
My System SpecsSystem Spec
Reply

 RNX-EasyN1 Wifi Adaptor wont work.




Thread Tools





Similar help and support threads
Thread Forum
Windows wont let me enable wifi adaptor
I've just installed a wireless PCI adaptor (Tenda W322P 11N) in my desktop PC but I can't 'enable' it - every time I double click it starts to enable then stops and leaves it disabled with no warning or error messages. The system is definitely seeing it as it's listed in Device Manager, and if...
Network & Sharing
WiFi TV adaptor
Ok so I want to hook my Toshiba laptop to the TV so I can do whatever with it in the living room. Now there are two ways I can see one is a HDMI cable - bit messy and I really don't like having cables draped across the floor etc The other I saw a You Tube clip on a plug in box for the TV so...
Hardware & Devices
Need Help. W7 wont boot after resizing partition. Recovery wont work.
Hi first time poster Full specs: MSI Z68a-GD80 i5 2500k Gtx680 Asus Hitachi Deskstar 1tb (boot) KingstonSSD120gb (games) So last night I shrunk my HDD partition by 100gb, intending to dual boot W8. Never got round to installing it, but when I turned on my PC tjis morning it won't boot. It...
Installation & Setup
Wifi Adaptor is installed/enabled but Windows can't detect networks
I got a Dell E6220 with Windows 7 32bits. Our System Admin pushed the new A/V upgrade from Symantec 11 to Symantec 12 and that broke all the network connectivities including Ethernet and Wifi. I was able to run CleanWipe couple time and get rid of all the Symantec crap and checked the registry...
Network & Sharing
Wifi adaptor not found
Hi I am using windows 8. My Intel wifi utility software doesn't found my network adaptor. But other than that the wifi just working fine. When I used windows 7 I didn't had this problem. Any solutions?
Network & Sharing
Regedit wont run, and grant admin full control context menu wont work
For some reason, my logon background image isnt showing up anymore, and when I try to change back to the way I had done it, regedit wont run, I've searched the forums for an answer, with no luck. And when I go to click grant admin full control, it brings up an open with menu, so I need a command...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App