Show us your SSD performance


  1. Posts : 1,117
    Se7en X64 ultimate/Se7en X64 ultimate
       #2281

    so I did goods? LOL
      My Computer


  2. Posts : 6,349
    Windows7 Pro 64bit SP-1; Windows XP Pro 32bit
       #2282

    Yes that one looks fine.

    I'm still not sure what is going on with the Kingston though.

    Odd readings but if it works okay then??????

    Maybe a Snip/ picture of the Kingston also.
    Might be helpful.
      My Computer


  3. Posts : 1,117
    Se7en X64 ultimate/Se7en X64 ultimate
       #2283

    yea the kingston sucks big time, BUT my rig boots in less than 17 seconds! I might get another 120gb SSD drive for it I have a feeling it might be the other HD drive slowing it down, cuzz I know THAT effects the WEI scores when I dont disconnect it
      My Computer


  4. Posts : 26,863
    Windows 11 Pro
       #2284

    beman36 said:
    yea the kingston sucks big time, BUT my rig boots in less than 17 seconds! I might get another 120gb SSD drive for it I have a feeling it might be the other HD drive slowing it down, cuzz I know THAT effects the WEI scores when I dont disconnect it
    It's not supposed to. WEI is supposed to be only the OS drive.
      My Computer


  5. whs
    Posts : 26,210
    Vista, Windows7, Mint Mate, Zorin, Windows 8
       #2285

    How about the alignment - is that correct: SSD Alignment
      My Computer


  6. Posts : 1,117
    Se7en X64 ultimate/Se7en X64 ultimate
       #2286

    Well I remember in the Wei post, they tell you to make sure u disconnect all other hard drives when doing the WEI test as the other HD impact the test in a negative way
      My Computer


  7. Posts : 4,517
    Windows 7 Home Premium 64bit
       #2287

    beman36 said:
    Well I remember in the Wei post, they tell you to make sure u disconnect all other hard drives when doing the WEI test as the other HD impact the test in a negative way
    Im not sure thats true.
    The WEI should only test the drive Windows is on.

    Mine always show the same whether its the SSD only, or if I have 3 spinners connected as well at the time of the test.

    I could be mistaken, but have never noticed such behavior here anyway.


    Disconnecting all other drives except the main SSD is a good idea for the initial Windows installation though. Although it may not always be needed, I still recommend a clean install to a new SSD this way.
      My Computer


  8. Posts : 1,117
    Se7en X64 ultimate/Se7en X64 ultimate
       #2288

    well for a fact I know this to be true cuzz I did the test BEFORE my spin hard drive was connected and got 7.6 then when I connected the hard drive and re-did the test it dropped to 7.1...which is why I did the test in that manner cuzz the WEI thread said to do it that way...which I confirmed in my test
      My Computer


  9. Posts : 26,863
    Windows 11 Pro
       #2289

    My WEI score is the same whether I connect only the SSD or whether I have 3TB of other mechanical hard drives connected along with the SSD.
      My Computer


  10. Posts : 4,161
    Windows 7 Pro-x64
       #2290

    It doesn't effect my results either. I've got the SSD and WD-500 on the SATAIII ports and a WD-750, for backup, on the SATAII port. I get a consistent 7.9 on WEI.

    I suspect the problem may be driver or motherboard related.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:28.
Find Us