Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Show us your SSD performance

06 Nov 2010   #791

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint

Hello everyone. I have some questions. I installed a Vertex 2 90GB drive last night. I am in AHCI mode, disconnected all other grives before installing, followed the tutorials, moved my user folders over to a spinner. Based on the comments I have heard, I am a little dissappointed. My system does seem a little faster, but not like the comments. I am including (hope i'm doing it right) some benchmarks. My main questions are:
Is this the performance I should expect?
How do I know if trim is enabled in Windows 7 and how do you schedule it?
Like I said before, I moved my user folders over to a spinner. Now I have a library for hte C drive with nothing in it and also have a library under my user nsme with all of thr info in it. Is this normal?

Attached Thumbnails
Show us your SSD performance-vertex-ssd.png   Show us your SSD performance-vertex2-atto.png  
My System SpecsSystem Spec
06 Nov 2010   #792
Microsoft MVP

Vista, Windows7, Mint Mate, Zorin, Windows 8

Your performance numbers are not withing the norm that I experience with a Vertex.

1. Trim you can check with this command: fsutil behavior query DisableDeleteNotify
If Command Prompt returns a 0 (zero), your drive supports TRIM and it is enabled.

2. I suggest you also check the alignment. You use the following commands.

List disk
Select disk n
List partition

Now you should see a result like this.

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 59 GB 1024 KB

The offset has to be divisible by 4.
My System SpecsSystem Spec
06 Nov 2010   #793

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64

You can compare your SSD with other OCZ and the same chipset.

AS SSD Benchmark thread

Your read/write numbers aren't too bad but, the Acc. time is a little off.

Did you update the firmware?

Just noticed in your AS SSD snip, you have 1.22 firmware (new is 1.23) it's not that old.
MS storage driver msachi
64k - ok, that's your offset alignment, green font indicates is ok.

For reference.

Sandforce Firmware update 1.23 (Vertex2, Agility2, Vertex-LE, Vertex2 Pro, Vertex2-EX, Vertex2-E, Agility2-E)

Some good information.

As for Trim,

Q. How do I know if TRIM is enabled on my OCZ SSD?
A. In Windows 7, go to start/run/cmd), type the following:
fsutil.exe behaviour query DisableDeleteNotify.
It should respond back with:
DisableDeleteNotify=0 if TRIM support is ready and active.
If it's not.. type fsutil.exe behavior set DisableDeleteNotify 0.

My System SpecsSystem Spec

06 Nov 2010   #794

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64

Quote   Quote: Originally Posted by tw33k View Post
Been a lot of debate regarding the Crucial C300 and Marvell 91xx driver vs msahci so I thought I'd put it to the test. I uninstalled the Marvell driver, rebooted and Windows loaded the msahci files and got me to reboot again. I then ran AS SSD. When it was finished I reinstalled the Marvell driver (the most up to date version: 1001042) and re-ran AS SSD.

Here are the results:

Attachment 111463 Attachment 111464

The drive's performance has degraded but it's only noticeable in benchmarks. It "feels" just as fast as it always has.

Compare those to this:

Attachment 111466

only a few months ago.

Your Marvell driver is doing good for you, looks like you're seeing what has been referred to as the 'worn in performance'.

Just did a quick search and found this mentioned, seems it's due to the nand wearing.
Lot's of heated discussion on how/if it can be fixed.

It's great to be on the bleeding edge of hardware
My System SpecsSystem Spec
06 Nov 2010   #795

Windows 7 Ultimate (x64) SP1

I found a good article on this issue: Analysis: SSD performance -- is a slowdown inevitable? - Computerworld

It's only AS SSD that reports low random read speeds...

Show us your SSD performance-crucial_7_11_2010_2.png Show us your SSD performance-crucial_7_11_2010_3.png

My System SpecsSystem Spec
06 Nov 2010   #796

windows 7 32

I recently upgraded my DAW, with a fresh install.

i5-650, 4gb ram, win7 32,

Corsair Nova 64gb, rated at 270/130
I'm not using AHCI, but am very pleased with the system response.
And a 6.9 WEI

Attached Images
Show us your SSD performance-corsair-nova-ssd-110610.png Show us your SSD performance-corsair-nova-cdm3-110610.png 
My System SpecsSystem Spec
06 Nov 2010   #797

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)

hi all im just wondering is anyone using there ssd for the page file?
My System SpecsSystem Spec
06 Nov 2010   #798

Windows 7 Ultimate (x64) SP1

I am. I don't agree with moving it to another drive. There have been plenty of discussions on this on this forum.
My System SpecsSystem Spec
06 Nov 2010   #799

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)

i took my page file off the default hdd c drive and moved it to the ssd and i have readyboost on it to, in the diagnostic program in windows 7 i can see improvement and see the readyboost working fine.

Attached Thumbnails
Show us your SSD performance-readyboost.png   Show us your SSD performance-page-file.png   Show us your SSD performance-page-readyboost.png  
My System SpecsSystem Spec
06 Nov 2010   #800

Windows 7 Ultimate (x64) SP1

Have a read of this: The Truth About SSDs
My System SpecsSystem Spec
Closed Thread

 Show us your SSD performance

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Show us your SSD performance 2
Continued from: Benchmark Program Links: AS SSD Benchmark OR AS SSD Benchmark Download - Softpedia
Hardware & Devices
Show us your hard drive performance
I thought it would be interesting to compare everyones hard drive performances with screenshots from HD Tune utility (get from HD Tune). Maybe after some time we could produce a results table. So heres mine: Im going to show you the single WD Raptor X results first for interest: ...
Hardware & Devices
SSD show low performance
I bought a Samsung 840 EVO120Gb which is showing a very disappointing performance. My system is the following: Windows 7 Ultimate x64 Asus P7P55 WS GSkill 12gb Intel i5 760 2.8Ghz 4x Nvidia Quadro NVS 290
Performance & Maintenance
HDDs Show in BIOS, But Do Not Show in Disk Management
Hello, A newbie here that just completed a first-time new Win7 PC build. Successful installation of Win7 Pro on WD 600GB 10000 system drive. Went back and installed 4 additional HDD. (2) WD Caviar Black 1TB 7200 RPM and (2) WD Caviar 7200 500GB HDD from XP system that were used for storage. ...
Hardware & Devices
Show us your Mechanical HDD performance...
Since the SSD boys and girls have a "Show us your SSD Performance" thread, I thought I'd start one for us mechanical HDD owners. Simply DL, install, and run HD Tune and post screenshots of results here in this thread. Please also tell us the Make and Model of your HDD(s) and any other specs you...
Hardware & Devices
show hidden folders show file extensions thru registry
I am trying to setup a default user or machine setup for how win7 handles folder view options. I want show hidden folders to be set to on for all users and the hide extensions for know file types to be unchecked or turned off ffor all users (so extensions show) I have located them in the registry...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:52.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App