Windows doesn't recognize all my hdd capacity.


  1. Posts : 10
    Windows 7 Ultimate x64
       #1

    Windows doesn't recognize all my hdd capacity.


    Hello!
    I've just bought a new laptop. It was with Linux Boot-Up system. I installed Windows 7 Ultimate x64. Installed all drivers that were on official Acer homepage. Then I saw that the Windows doesn't show all my HDD capacity. It should show 500gb, but it shows only 232GB.
    What should I do?
    my comp. -
    Acer Aspire 5742G
    HDD
    WDC WD5000BEVT-22A0RT0
    picture of my HDD
    In attachment is screenshot from my PC.
    waiting for replies,
    best regards,
    Hemis
    Attached Thumbnails Attached Thumbnails Windows doesn't recognize all my hdd capacity.-untitled.png  
      My Computer


  2. Posts : 28
    windows 7 ultimate 32 bit
       #2

    Hello hemis, you said when you bought your laptop, than there operating system was "Linux". Therefore, I think, your hardisk formatted as linux file system base. Windows file system and linux file system is totally different. So when you installed windows 7, at that time you format your c: drive. So widows seven only recognize your c: drive. Because window's seven recognize that file system. Please you format all of other partition on your hardisk by "NTFS" file system. To see your all of other partition go to "run" option and write "diskmgmt.msc" and then press enter. Here you see all of your hardisk partition. Now select drive and right click and then chose "format".

    All the best.
      My Computer


  3. Posts : 10
    Windows 7 Ultimate x64
    Thread Starter
       #3

    Thanks, finally I found the other partition of my HDD, but now there's a new problem. I can't press 'Format'.
    what should I do?

    edit - and what will happen if I'll press 'delete Volume'?
    Attached Thumbnails Attached Thumbnails Windows doesn't recognize all my hdd capacity.-untitled2.png  
      My Computer


  4. Posts : 14,606
    Microsoft Windows 7 Home Premium 64-bit 7600
       #4

    just a guess ,but have you clicked the partition you wish to format fist ,try selecting it and the see if format is still greyed out.
    click where arrow points
    Windows doesn't recognize all my hdd capacity.-2011-08-23_1038.png
      My Computer


  5. Posts : 10
    Windows 7 Ultimate x64
    Thread Starter
       #5

    nop, there the menu even doesn't pop up...
      My Computer


  6. whs
    Posts : 26,210
    Vista, Windows7, Mint Mate, Zorin, Windows 8
       #6

    Use the bootable CD of Partition Wizard (last entry on the webpage): Free Download Magic Partition Manager Software - Partition Wizard Online
      My Computer


  7. Posts : 742
    MS Windows 7 Ultimate 64-bit SP1
       #7

    Hello Hemis,

    Open Disk Management by going to Run and typing "diskmgmt.msc". Select the non C: partition (most probably a linux partition), right click with mouse and select "Delete Volume" and in next dialog box click on "Yes". This will remove the partition and make the space Unallocated. In this space you can create either single or multiple partitions.

    To create a partition, right click on the unallocated space and select "New Simple Volume". This will open "New Simple Volume Wizard". Click Next. In this box to create a single partition filling complete unallocated space just click Next. Otherwise reduce the Size in Simple volume size in MB (up-down arrow buttons) or directly entering a value of your choice. Click Next and again Next.

    Now select file system as NTFS (preferably for Win 7) or exFAT for a extended FAT partition. Keep default allocation unit size. At Volume Label you may give a name or do nothing. Put a check mark on "Perform a Quick Format" and no check mark on "Enable File and Folder Compression". Click Next and review the settings you have made so far and Click Finish to exit the wizard. Now in the Unallocated space a partition will be created and formatted with a drive letter which appeared and selected in the wizard.

    You may always go back in the wizard before pressing Finish to change any values you have accepted before.
      My Computer


  8. Posts : 10
    Windows 7 Ultimate x64
    Thread Starter
       #8

    thanks to all of you! problem solved with minitool partition wizard. :)
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 02:42.
Find Us