Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: RAM Timings

29 Aug 2011   #21
manolz

Windows 7 x64
 
 

Ok I upped DRAM to 1.65, this is a report on my Patriot PSD32G16002 2GB(x2) 12800 1600MHZ CL9



My System SpecsSystem Spec
.
29 Aug 2011   #22
Sardonicus

Windows 7 Home Premium 64 bit
 
 

CPU-Z reports that your RAM is running at 800 MHZ per stick which is 1600 MHz.
My System SpecsSystem Spec
29 Aug 2011   #23
manolz

Windows 7 x64
 
 

Heres a report on Sektor 5 (DRAM 1.65, timings @ 9-9-9-24 in BIOS)




-----------

looking forward to replies

thanks
My System SpecsSystem Spec
.

29 Aug 2011   #24
manolz

Windows 7 x64
 
 

Quote   Quote: Originally Posted by p5bdkw View Post
CPU-Z reports that your RAM is running at 800 MHZ per stick which is 1600 MHz.
Shouldn't each 2GB stick be running at 1600mhz? Or am I mistaken??
Is this how 99% of everyone running 1600mhz Ram CPUZ report should look like? @ 800mhz each.
My System SpecsSystem Spec
29 Aug 2011   #25
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Read post #20 and #22
My System SpecsSystem Spec
29 Aug 2011   #26
Sardonicus

Windows 7 Home Premium 64 bit
 
 

No, each stick runs at half of what the stated rate (1600) is.
That's why is called DDR (double data rate).
My System SpecsSystem Spec
29 Aug 2011   #27
manolz

Windows 7 x64
 
 

Ok, My latest CPUZ states these Sektor Sticks are running at 1600mhz.
In my SPD section Max Bandwith is (533MHZ) (My PSD32G1600 sticks state Max Bandwith is 1600mhz)

Can I conclude these Sektor5 sticks are running at 1600mhz as were my Patriot sticks?
My System SpecsSystem Spec
29 Aug 2011   #28
manolz

Windows 7 x64
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Do this, Remove the 1066MHz sticks and see what you get. Put them in a drawer. Buy 2 more 1600MHz indentical to what you now have, put them in.
In BIOS set CPU NB FREQ to X11
CPU FREQ 200
Mem clock/Manual, X8
Should I keep the Sektor 5 sticks (If they're running correctly at DRAM 1.65) and use them with my PSD32G1600?, Or do you suggest I change over to Identical sticks?

manolz
My System SpecsSystem Spec
29 Aug 2011   #29
manolz

Windows 7 x64
 
 

And in saying that, if I were to switch to identical sticks at 8gb, should I keep the PSD32G or Sektor5?
Any advice welcome thanks
My System SpecsSystem Spec
30 Aug 2011   #30
manolz

Windows 7 x64
 
 

ok, so even though my max bandwith on these sektor5 are capped at 533mhz

there still running at 1600mhz, as stated here



correct?

and my psd32g sticks are running at 1600mhz
as stated here


can anyone confirm this?, i'm going to go for identical sticks (unless these 2 different modules can run side by side at 1600mhz)
thanks
My System SpecsSystem Spec
Reply

 RAM Timings




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
RAM timings changes on its on
Hi I have noticed that my RAM's clock speed is being changed on its own and wondering why this is happening since I have manually set the timings/speed & voltage in bios, my RAM is suppose to run at 9,9,9,24 @ 1600mhz, that is what it is set in bios also but looking in speccy & cpu-z the timings...
Hardware & Devices
not sure about ram timings
hi all. this is the ram im using 8Ghz 2x4 corsair CMX8GX3M2A1600C9. everywhere ive looked online says the speed is 1600 timings 9-9-9-24. but looking at my speeds n timings mine is runnin at 1066 7-7-7-20. is this just down to my mobo? should i change it and would there b any noticeable increase...
PC Custom Builds and Overclocking
Ram Timings
hey! Corsair XMS 3 1600Mhz 1.64V-currently vs stock 1.5 at 1066Mhz haven't touched the timing but it is, (9-9-9-24) i have heard as you increase the voltage it is a good idea to lower the timing for everything to keep up with the new clock/voltage also, anyone who has worked with XMS 3,...
PC Custom Builds and Overclocking
i7 920 Ram Timings
Hi, I have a set of 6gb (3x2gb) corsair xms 3 @ 1333mhz which are currently by default running at 1066 mhz. My CPU is Intel i7 920 currently at stock (2.66Ghz) If I just arrange the timings from the bios will it cause any problems / damage ? Are the timings related to the cpu clock ? Thanks
PC Custom Builds and Overclocking
ram timings
hello all, i just completed my first build and used corsair ram with a 7-7-7-20 latency. in cpu-z it says i have a 8-8-8-20 latency. whats up with that? second question, per my hardware in my profile, would i benefit greatly to build a raid 0?
Performance & Maintenance
RAM Timings
I have been experiencing random BSODs. My memory could have been the culprit. I've run memtest for 10+ hours and no issues so its not faulty. While snooping around the BIOS, however, I noticed that the CAS timings were 9-9-9-24 instead of the 9-9-9-20 mentioned on the website. Should I change...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:34.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App