Bluetooth Laser Mouse BT


  1. Posts : 16
    WIn 7 Utlimate x64
       #1

    Bluetooth Laser Mouse BT


    Firstly, I hope this is the correct Forum for this post.

    I have a New HP650 Laptop with Win 7 64bit Home Premium installed.

    I purchased a Bluetooth Laser Mouse BT which I installed from the disc provided.
    Initialy the Mouse worked fine, untill, win 7 went into standby mode. When I went back into Windows, the Mouse would no longer work. Nothing I attempted would recover it. Switch Off, Switch On, Press ID Button to reconnect, nothing.
    I Un Installed the Program and Drivers.
    I then Re Installed and it worked fine, untill, and you know the rest of the story.

    This problem seems to associated with win 7 going into Standby Mode and Recovery.

    Does anyone have a clue about this Nasty.

    Regards
    Owen Carlton
      My Computer


  2. Posts : 4,161
    Windows 7 Pro-x64
       #2

    Does the BT transceiver plug into a USB port? Check that the two options shown below are Disabled. The first is accessed from Device Manager under the USB Hub Properties. The second is accessed through the Power Options in the Control Panel then clicking on Change Plan Settings (for plan you use) > Change advanced power settings. There seems to be a common problem with USB ports after the PC goes into hibernation.
    Attached Thumbnails Attached Thumbnails Bluetooth Laser Mouse BT-usb-hub-power-management.jpg   Bluetooth Laser Mouse BT-usb-suspend-setting.jpg  
      My Computer


  3. Posts : 16
    WIn 7 Utlimate x64
    Thread Starter
       #3

    Bluetooth LaserMouse BT


    Thank you Carwiz, your idea looked good to me and sort of made sense to me, so I tried it.
    Made both changes, as you suggested, Mouse was working, waited 30 minutes, Recovered Windows from Standby and, guess what, mouse would not work. I thought I may need to restart, which I did, Mouse not working, turned Mouse Off and back On, and it worked.
    I do not know how long it takes Mouse and Receiver to respond to one another, after any event, such as Recover from Standby, Switch Off and ON, etc.
    I still feel there is something in Windows that is causing this problem.

    Thanks again.
      My Computer


  4. Posts : 4,161
    Windows 7 Pro-x64
       #4

    Where do you have the BT dongle plugged in? Are you using one of the front hub ports? If you are, move it to one of the rear ports.

    Just thought of something else too if the above doesn't work. Gigobites had some problems with USB on their motherboards a while back. Check for BIOS and Chip Set driver updates for your motherboard.
    Last edited by carwiz; 15 Mar 2013 at 19:24. Reason: Addition
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:56.
Find Us