Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Marked wrong drive as active need help

14 Oct 2011   #11
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by theog View Post
Physically disconnect the secondary HD.
Make the Windows 7 HD, disk0 & first HD boot in BIOS.Also connected to the first Sata port on the MOBO.

You may need to do a startup repair:
Startup Repair
Note: You may need to do startup repair 3 to 4 times.
Startup Repair - Run 3 Separate Times
When Windows is booting OK, Reconnect the other secondary HD, as Disk1.


If you have not made your Startup Repair
System Repair Disc - Create
Do you have a mate with Windows 7 of the same bit version 32 or 64 & CD/DVD RW Drive, how could burn one off.
First part of above.


My System SpecsSystem Spec
.
Reply

 Marked wrong drive as active need help




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BOOTMGR is on the wrong drive? Partition marked as SYSTEM
Hello all, Just got a new motherboard yesterday so I hooked it all up, connected the SATA hard drives in the same position ports on the new motherboard as they were on the old one. Re-installed WIndows 7, and it's working fine. Installed onto C:\ which is correct, however I noticed that the 'boot'...
Installation & Setup
New Seagate External Hard Drive Marked "Active"
Hello 7Forums Guru's. I've never used external media and am trying to decide on a partition scheme for data storage (ISO's, music, pictures about 100-150 gb) and to store weekly backups, system image etc) but before I even start on that end, should my external HDD (Seagate Backup Plus 1 TB) be set...
Hardware & Devices
Wrong Drive Is System Active?
I have a main drive, drive C, with its affiliated system volume Drive G. I installed and formatted a second drive, Drive E. It's affiliated system drive is Drive F. this drive says it's "system active." shouldn't the G Drive be system active? I think this is causing a problem for me when trying...
General Discussion
Marked wrong partition as active, don't have access to Windows 7 DVD
Okay first of all, I don't know if this is the correct section. I marked the wrong partition as active in Windows 7, the problem is that I do not have access to a Windows 7 DVD to use diskpart. And I don't have access to any other computer at the moment. The only thing I have access to is an old...
General Discussion
Wrong drive is System and Active
Here is my disk management screen http://i.imgur.com/mjXWbpF.png but i don't know why my Storage drive is a System drive when I only use it to store data. i figured out how to remove the active from it; http://www.sevenforums.com/tutorials/197157-partition-mark-inactive.html but how can...
Installation & Setup
Accidentally marked drive C as active
I started O&O partition manager and accidentally pressed active on partition C and now I cannot boot windows... I am using build 7600 x86 I loaded up the windows 7 iso on a usb memory and booted from it and chose repair, it said it found things to repair, i pressed ok, it rebooted but it did not...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:45.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App