Intel core i5 2500k 0x0000124 help!

Page 1 of 2 12 LastLast

  1. Posts : 18
    windows 7 gome premium x64
       #1

    Intel core i5 2500k 0x0000124 help!


    Hey i have a storm by BSOD but when i turn my i5 to only work from 2 cores it will work just fine. But i'ts slower becouse i only runs from 2 cores. What can be the problem? have all the lates driver, no overclock, cpu temp 34 C, all cabels connected.. Help thanks!

    Asrock fatal1ty professional (updated)
    Corsair ax 850w
    Corsair vengance 4gb 1866mzh
    Corsair vengance 4gb 1866mzh
    Corsair h80
    Corsair force 3 (have disconnected it and boot from usb no change, have the update to)
    Msi geforce 560 ti (updated)
    Nzxt phantom



    (DMP file)
    102811-6068-01.dmp
      My Computer


  2. Posts : 28,845
    Win 8 Release candidate 8400
       #2

    loox said:
    Hey i have a storm by BSOD but when i turn my i5 to only work from 2 cores it will work just fine. But i'ts slower becouse i only runs from 2 cores. What can be the problem? have all the lates driver, no overclock, cpu temp 34 C, all cabels connected.. Help thanks!

    Asrock fatal1ty professional (updated)
    Corsair ax 850w
    Corsair vengance 4gb 1866mzh
    Corsair vengance 4gb 1866mzh
    Corsair h80
    Corsair force 3 (have disconnected it and boot from usb no change, have the update to)
    Msi geforce 560 ti (updated)
    Nzxt phantom



    (DMP file)
    102811-6068-01.dmp

    Your .dmp file shows a stop error of 0x124 which is a general hardware error .

    A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

    Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

    You can read more on this error and what to try here... Stop 0x124 - what it means and what to try


    Before doing the above I would remove Symantec and replace with Microsoft Security Essentials


    http://us.norton.com/support/kb/web_...080710133834EN

    Microsoft Security Essentials - Free Antivirus for Windows
      My Computer


  3. Posts : 26,863
    Windows 11 Pro
       #3

    It would also be helpful if you fill out your system specs. At the bottom left of your post is system specs, click that and then update. Are you overclocked? what are your CPU temps, what are you using to monitor them and what is your Vcore?
      My Computer


  4. Posts : 18
    windows 7 gome premium x64
    Thread Starter
       #4

    Why will i uninstall my old anitvirus? will that help?

    Not overclocked (have been), My cpu temp IDE is 32 C
    The vcore is 1.134 (not changed from defucult).
      My Computer


  5. Posts : 26,863
    Windows 11 Pro
       #5

    Set your Vcore in bios to 1.20. And please fill out your system specs. It helps us know what we are dealing with.
      My Computer


  6. Posts : 11
    Windows 7 home premium 64bit
       #6

    0x124 is hardware problem and most notable overclocks. set everything back to default in ur bios
      My Computer


  7. Posts : 18
    windows 7 gome premium x64
    Thread Starter
       #7

    My system spec is

    Asrock fatal1ty professional (updated)
    Corsair ax 850w
    Corsair vengance 4gb 1866mzh
    Corsair vengance 4gb 1866mzh
    Corsair h80
    Corsair force 3 (have disconnected it and boot from usb no change, have the update to)
    Msi geforce 560 ti (updated)
    Nzxt phantom

    all is defucult, but the vcore is now lower for some reason, only 1.0 v!
      My Computer


  8. Posts : 26,863
    Windows 11 Pro
       #8

    You have to see what Vcore is in bios. Intel speedstep at idle reduces the frequency to 1.6 and lowers the Vcore to between .097- 1.13. You need to see what the Vcore is in bios or run prime to see where you are. With the K chips you are only oCing the turbo boost. To change the Vcore you need to set the Vcore to offset mode and increase or decrease the core in steps by using offset. What does bios say your vcore is? You need to set everything to default and Vcore to auto and run prime95, memtest86 and furmark. Those are stress tests. Your error codes are hardware related. You need to find out what hardware is causing problems. I would recommend to do it at default settings on everything. you have to find the error prone hardware, before you try to overclock. If you have error prone hardware, any overclock will fail.
      My Computer


  9. Posts : 18
    windows 7 gome premium x64
    Thread Starter
       #9

    i get a new error message now, the error message is 0x0000004e. What does this mean? I have fully updated all my drivers, so maybe it's two problems. One is done, and this new is another one?
      My Computer


  10. Posts : 18
    windows 7 gome premium x64
    Thread Starter
       #10

    New infomation


    Hey i have been working new infomation to your guys, hope it will help you to help me!

    · OS - Windows 7
    · x64 (64bit)?
    · What was original installed OS on system? I have only install my os windows 7 home premium
    · It's a OEM license version
    · My hardware is only 3 weeks old.
    · My os is the same 3 weeks.

    · CPU- Intel core i5 2500k
    · Video Card - Msi geforce 560 ti
    · MotherBoard - Asrock fatal1ty professional
    · Power Supply - brand & wattage - Corsair ax 850w

    · System Manufacturer - Build this computer on my own.
    Intel core i5 2500k 0x0000124 help! Attached Files
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:35.
Find Us