motherboard help RS780HVF


  1. d0nny94
    Posts : 1
    windows 7 64bit
       New #1

    motherboard help RS780HVF


    hi i recently bought a 4870x2 for my pc and its bottlenecking i fink soo im trying to update my cpu to be a phenom ii x4 but i ned to find out the max wattage my motherbourd can handle soo i can get the best card for it i dont really want to buy a new 1 becouse of the money
    so the bourd is a RS780HVF
    its a acer bourd and came with my m3201
    ive been looking for hours to find out what it is on google
    but every post i find they say its diffrent i found some that say its 125w,95w and 80w
    it has a phenom 9550x4 in atm if you need anymore info post

    thx for reading and for the help
      My Computer
    Quote Quote

  3. Kuytre
    Posts : 2
    Windows 7 Ultimate 64-bit
       New #2

    Someone has said 140w max, however I can't find any supporting information.
    A safe bet would be not to go over 95w, which a few people have also said.
      My Computer
    Quote Quote

  4. ReviverSoft
    Posts : 177
    Windows 7 HP / Ultimate x64
       New #3

    Please look here:

    will new cpu work with current mtherboard

    Although the motherboard will support an AM3 processor after a BIOS update, there isn't any conclusive info. on the CPU wattage supported.

    As suggested above, stick to the 95W limit or get a newer (better) motherboard.
      My Computer
    Quote Quote

 

  Related Discussions
New am3+ motherboard
in Hardware & Devices

Hey guys i decided today i wanted a motherboard that would support xfire/sli I decided i liked the look of this one http://www.ebuyer.com/349910-gigabyte-ga-970a-ds3-socket-am3-7-1-channel-audio-atx-motherboard-ga-970a-ds3 I have a few questions though 1. Would it support sli for newer cards...
Hello. I have read the forum on sysprep, however I see that there are some procedures which must be completed before the old HHD is removed and input into the new motherboard. Problem is.....My old motherboard crashed and I cannot implement sysprep on the old system, how would I get along...
NEW mOTHERBOARD
in General Discussion

I HAVE AN Asus SOCKET 775 motherboard that has to be replaced. I'm going to replace it with a new Asus that is the same as the old one so I can use all my old stuff on the new one.I have 2 500gb hdd's .1 has windows 7 32 bit installed & the other has windows 7 64 bit.When I install the new MB...
Hey guys i just finished my build and i have no idea why i went for a motherboard with 2 slots for ram it can hold up to 16gb but luckly ebuyer sent me out an extra 4gb of kingston hyperx ram so i have 8gb all together but theres a problem theres 4 sticks ! obviously i wouldnt want to send...
New motherboard and CPU
in Installation & Setup

My computer has just quit on me because of an apparent motherboard problem.:( I am using this as an opportunity to upgrade both the board and the CPU which are en-route as I write this. I moving up from an Athlon 64 socket 939 to a Phenom II socket AMD 3 on an Asus M4A88T-M/USB3 board.:D ...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 14:17.
Find Us