Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Computer Attempts to Turn On then Doesn't


30 Dec 2011   #1

Windows 7 Home Premium x64
 
 
Computer Attempts to Turn On then Doesn't

My computer attempts to turn on, then like .3 seconds after I press the power button, it turns off. I opened the case to see what was the problem. The power supply does work, because it is showing lights before cutting itself off it seems.

So far I have a list of good parts, and they are as follows:
RAM
Graphics Card
Power Supply
CD/DVD Drive
Hard Drive
Heatsink/fan

I have bought a new motherboard and CPU recently.

They are: AMD FX-4100 Quad-core and ASRock 970 Extreme 3.

Any suggestions as to what is wrong?

Thanks!


My System SpecsSystem Spec
.

30 Dec 2011   #2

Microsoft Community Contributor Award Recipient

Windows 7 SP1, Home Premium, 64-bit
 
 

A couple of things to start with:

You say "I have a list of good parts".

What makes you think they are good?

Do your fans start to move when you try to start?

Can you hear the hard drives try to spin when you try to start?
My System SpecsSystem Spec
30 Dec 2011   #3

Windows 7 Home Premium x64
 
 

I have tested the "good parts" on my other computer to see if they spin and such and they are operational.
My System SpecsSystem Spec
.


30 Dec 2011   #4

Microsoft Community Contributor Award Recipient

Windows 7 SP1, Home Premium, 64-bit
 
 

What about my last 2 questions?
My System SpecsSystem Spec
30 Dec 2011   #5

Windows 7 Home Premium x64
 
 

Sorry, it slipped my mind lol

But, I can see the power supply fan and heatsink fan spin momentarily when I try to start it on my computer that won't run.

The hard drive makes no sort of sound or spin noise or anything at all.
My System SpecsSystem Spec
30 Dec 2011   #6

Microsoft Community Contributor Award Recipient

Windows 7 SP1, Home Premium, 64-bit
 
 

Here is a series of troubleshooting steps from member TVeblen.

You should be able to adapt them to your situation.

Strip it down and then add components back, one at a time, to try and isolate the offending component.

The test (power off, power cord unplugged):
Disconnect everything externally connected except the mouse and keyboard (printers, USB devices). If you are not using a wired mouse and keyboard see if you can borrow one.
Disconnect the power and data cables from all the drives inside the computer (Hard drives, DVD/CD drives).
Remove all the cards installed in the PCI slots including the video card. (be careful handling them and place them on a non conductive surface while testing).
Remove all the RAM sticks (same rules as above).
Now connect the power cord and turn the PC on.
The motherboard should start beeping. You should get a beep code that tells you there is no memory. This is good, it means the processor is functioning and the motherboard is good so far.
Now add one stick of memory in Slot A1 and power on. More beeping: "no video card" beep code. This is good.
Then add the video card and connect it to the monitor. You should get no beeping and you should see the BIOS screens, ending with the message that there is no boot device.
If you get no video then switch the one memory stick installed for another one and test.

Continue adding components one at a time.

If at any point the PC fails the the last component added was the problem one.

If you removed everything and there is only the Motherboard (with integrated video), processor, and power supply to contend with and it does not POST or show anything on the screen, then the problem is one of those three.

If you have tested by using another power supply then you are down to two. CPUs rarely fail, so motherboard is the most likely guess.

Try performing a CLRTC or Clear CMOS as a last ditch effort, and check the 3v battery. Both long shots, but what do you have to lose at this point.
My System SpecsSystem Spec
30 Dec 2011   #7

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

+1^
My System SpecsSystem Spec
30 Dec 2011   #8

Windows 7 Professional 64 Bit SP1
 
 

I would say it's a 90% chance that your motherboard is the problem.

I had the exact same symptoms several months ago & replacing my mobo solved the problem.
My System SpecsSystem Spec
30 Dec 2011   #9
Microsoft MVP

Windows 7 Ultimate SP1 X64 (Windows 10, 8.1, Linux Mint, Windows XP and others in VM)
 
 

The only thing I would like to add to TVeblen's excellent troubleshooting steps is to recheck the PSU connections to the motherboard, even if you are sure they are right. On the 20+4 pin connection, the 4 pin separates from the 20 pin and can therefore not be completely seated. The same with the 4 or 8 pin ATX connector. Also, if you have 4 pins showing on the ATX and there are 4 more covered with a sticker, remove the sticker and plug in 2 4 pin connectors there, it is an 8 pin connector.

EDIT: Also make sure the CPU Cooler fan is plugged into the CPU fan connector.
My System SpecsSystem Spec
31 Dec 2011   #10

Windows 7 Pro x64
 
 

I have the same CPU and MB, make sure that you have the CPU fan connected to the CPU fan Header 1 as there are 2 CPU fan headers, the other thing to chck is that you have the ATX power cable plugged in, I have just the 4 pin ATX plugged in and it works just fine that way.
My System SpecsSystem Spec
Reply

 Computer Attempts to Turn On then Doesn't




Thread Tools



Similar help and support threads for2: Computer Attempts to Turn On then Doesn't
Thread Forum
Solved BSOD after computer attempts to wake from SLEEP BSOD Help and Support
Solved Computer turned off suddenly, now doesn't turn on Hardware & Devices
My Computer monitor doesn't show anything when I turn my computer on. Graphic Cards
Computer doesn't even turn on BIOS! Afraid motherboard is dead! Hardware & Devices
Solved My Computer doesn't turn on BSOD Help and Support
Power Change attempts crash my computer! BSOD Help and Support
HDD doesn't turn off Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:18 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33