Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 2 USB mice one not recognized at boot

03 Jan 2012   #11
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

I see it more often with printers and keyboards while some pointers also seem to draw a little more from the usb bus. It can also depend on the hub you use as well. The self powered hubs tend to fare better since the ac adapter supplies the current not the usb bus preventing a pull down of current on the port itself.


My System SpecsSystem Spec
.
Reply

 2 USB mice one not recognized at boot




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
New Hard Drive Not Recognized During Boot-Up or Windows 7 Installation
Motherboard: ECS KM400-M2 (3.0) 462(A) VIA KM400 Micro ATX AMD Motherboard ECS Web Site > KM400-M2 (V3.0) I just purchased a new hard drive to use for hosting, as I am creating a server computer. I took that old motherboard, put it in a new CoolerMaster Case, along with a new hard drive WD...
Installation & Setup
Built in SSD, recognized in Bios but doesn't boot
Hi, I've built an 128gb Samsung (830 Series) SSD into my Acer RL70 Nettop. It was empty and when I tried to boot the nettop there was only the message "ERROR: No boot disk has been detected or the disk has failed". Then I connected the SSD to another computer and installed windows on it and it...
Installation & Setup
Keyboard recognized only at first boot
Hi everyone, today I built new pc for my brother and encountered a problem. When I start pc first time (after reconnecting it to power socket), keyboard is recognized and I can see HID Keyboard Device and Standart PS/2 Keyboard in my device manager, but when I restart or shutdown and again start...
Hardware & Devices
SSD not recognized at boot, still loads. 40GB used only installed 7pro
When i installed windows on the driver 59GB were available. after installation of windows and device drivers 24GB is all that is left. Am i missing something? win7 is approx 11GB and drivers may add up to 500mb. where did my other 30 go? Nothing else shows up under the directory yet the drive...
Hardware & Devices
DVD does not burn or get recognized; cannot boot win7
Hey guys, ive had this problem for a wHILE now and i'm looking and looking but I can't seem to find an answer. I've really tried everything and I don't know what else to do. I have Windows 7 installed and it does not recognize DVDs/Cds. When I put one in, sometimes it recognizes it but when i...
Hardware & Devices
Flash drive not recognized when trying to boot Win7
I've created the ISO file and moved it to the 4g drive using the AWESOME guide found here. However, the BIOS doesn't seem to recognize that the device is present. I've done some research and found that some usb drives aren't compatible with the BIOS? I made usb storage the only available boot...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App