Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New to SSD's. First install attempt with bad read/writes

08 Jan 2012   #31
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I believe any matx board with an 890 or 990 chipset will do what you want and more. The 990 chipset will be AM3/AM3+


My System SpecsSystem Spec
.
09 Jan 2012   #32
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

To check your alignment and firmware version download AS SSD, you don't need to run the benchmark, just open it and in the upper left corner you will see the information.
Controller brand
Firmware version
Driver
Alignment info (Green font means it's ok, Red font means it's not)
Available space in GB


Is this your motherboard: GA-M68MT-S2P (rev. 1.0)

You can look on the top left of your motherboard for the revision number.

The NVIDIA GeForce7025/ nForce630a chipset may cause the SSD to be a little slower.
It has SATA 3Gb/s & RAID, RAID setting in your BIOS will be better than IDE.
According to a quick search, NVidia RAID will work on the SATA ports, not sure about the driver for that port.
Maybe someone will confirm.
My System SpecsSystem Spec
Reply

 New to SSD's. First install attempt with bad read/writes




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Attempt to write read only memory (egldrv.sys)
hellow me using window 8 32bit on my Hp laptop. i recently update the window and restarted it. when tiles come the Bsod says ''attempt write to read only memory (egldrv.sys). please help me i can turn on using safe mode...
Drivers
Tip: Speeding up writes to DVD RAM
Writing to DVD RAM seems to be somewhat of a problem on W7, with speeds going through the floor, yesterday copying around 3.5Gb started at a decent speed of over 1Mb/s, only to drop off to around 100kb/s after about half an hour, with a "time remaining" increasing beyond every reason. Then,...
Performance & Maintenance
Writes to hyberfil.sys
Does Win 7 constantly write to the hyberfil.sys file or only when the computer is going into hibernation?The reason I ask is the only way my UPS can save my work before shutting down the computer in the event of a power failure is to hibernate it so, obviously, I need hibernate enabled, complete...
Performance & Maintenance
Install+Run Windows Without a Hard Drive - Attempt Failed.
Hi everyone, My eMachines eM250 netbook currently has no hard drive as the old one broke a couple of months ago. In an attempt to get the computer up and running again, i ran it on Ubuntu 12.10 through a bootable USB memory stick which worked fine. Unfortunately Ubuntu isn't really good enough...
Installation & Setup
BSOD: An attempt was made to write to read-only memory
My laptop has been crashing for these two days now... Please ignore the minidump before December 2011 because it might be irrelevant? By the way, I got BSOD "usually" when I play games and video calling through skype. :cry: Hope someone can see what's the problem. Thanks! :) EDIT: I tried...
BSOD Help and Support
BSOD! attempt to write to read-only memory
I am going to post a new theme for this problem, because it doesn't appear in news (In BSoD Help and Support). It considers a old theme. So you can delete this.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App