Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: USB device not recognized problem! I've tried everything!

11 Jan 2012   #1
Big Dan Stud

Windows 7 Ultimate x64
 
 
USB device not recognized problem! I've tried everything!

Ever since I moved into my new apartment a month ago I've been having problems with my USB mouse. I got a new one for christmas and the problems still persist. When i first moved in it was working ok but randomly not working then it finally gave out. Every time i insert the mouse receiver it would be like rolling the dice whether it would work or not. I've tried my tablet and my memory stick as well and those don't work either so i know its not a problem with the mouse.

I've looked through forums online and have tried almost everything:

I unplugged the power cord waited and plugged it back in.

I've uninstalled all of the USB Root Hubs

I've unchecked the Allow the computer to turn off this device to save power

I've updated my Chipset

I've updated my BIOS

I've tried Microsoft Fixit

I've installed the driver for the mouse from its website.

The ONLY thing that seems to work but is only temporary is when I uninstall all of the USB Hub Roots and any software/driver the mouse had installed, then shutting it down, unplugging the power cord from the computer waiting a few minutes then starting it up. When i do that, the mouse will install fine and work "OK" (skipping around every now and then) but still working. but if i leave the computer alone and the mouse still, an hour or two later i hear the removed USB sound and then the mouse doesnt work anymore.

HELP! This is so frustrating.


My System SpecsSystem Spec
.
11 Jan 2012   #2
Qdos

 

I've had similar unresolvable problems with a Logitech RX720, tracks perfectly OK. However it has issues with cut and paste in word and graphics format. Struck me as being fine until post W7 SP1, and it functions perfectly in every other PC I've access to.

USB wireless shares the same 2.4Ghz band as WiFi, and DECT telephones, and is also prone to interference from any nearby microwave equipment. Some claim nearby cellular phones can also interfere. Eventually I lost faith in wireless and went back to a wired laser mouse, but do consider possible RF interference factors.
My System SpecsSystem Spec
12 Jan 2012   #3
jumanji

Windows 7 Home Premium 32 bit
 
 

And if you want to confirm this, try your USB mouse on a friend's PC in a reasonably faraway location.
My System SpecsSystem Spec
.

12 Jan 2012   #4
patio

Vista Ultimate X64/ Windows 7 Dual-boot
 
 

Did you replace the batteries ? ?
My System SpecsSystem Spec
Reply

 USB device not recognized problem! I've tried everything!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
USB Device not recognized
Hello :) If I opened the topic in wrong section, please sorry... Sorry if bad english. Please read the whole text so you could fully understand what is the point :) Here is my problem. Every Mass Storage device I put in the USB slots, came with the message USB not recognized... It...
Hardware & Devices
USB device not recognized - Help!
I'm recieving the following error "USB device not recognized". I have attempted many fix recommendations I have seen posted aroun the internet with no luck. My usb ports were working fine previously with xp and vista installed on my system. I installed windows 7 and they were working fine until the...
Drivers
USB device not recognized - but there is no usb device connected
It's recognized in device manager as "Unknown device". But I've not connected anything to pc. Also all of my usb ports are working at 1.1 speed. When I try to connect any device, I get the message "that it could work faster, if i connect it to hi-speed usb port". Any suggestions?
Hardware & Devices
USB device Not Recognized
Hi I'm trying to transfer files to a USB device and it is all of the sudden "not recognized" It was working before and suddenly stopped. It used to come up as F: I have tried uninstalling and reinstalling in Device Manager, and moving usb ports. All help is appreciated.
Hardware & Devices
USB Device Not Recognized
OK Here's my problem. I get a "USB Device Not Recognized" error when I plug my camera into the front USB port of my computer. It works fine when I plug it into the back USB port. Because of the position of my PC, it is a royal pain to get to the back side of the PC, so I really want to be able...
Drivers
USB Device Not Recognized
Hi guys!! I've been meaning to ask some help regarding the issue that I am having however I was reluctant because of the fact that I fix computers for a living(I'm not that good at it though..:(). I need help!! I've been getting "USB device not recognized". I got the issue after...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App