Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: PCI dose not seam to detect my graphics card after NETFRAME 4.0 Update


26 Feb 2012   #1

Windows XP 32 Bit
 
 
PCI dose not seam to detect my graphics card after NETFRAME 4.0 Update

Hello. I'm really new to this thread, and this just happened 18 hours prior to this post. I had to reboot my Windows XP (32 bit) After i downloaded NETFRAME 4.0. When i did, my pc hummed to life, but my monitor (A E19T6W) registered that my GTS 250 1024 MB Card was not reading. I check multipul times, looking at the graphics card as it runs. The fan works like it normaly does, but the display is not working. I am now running on my intergrated motherboard (Asus A8N-LA) Which is a Nvidia GeForce 6150 LE, and i do not know what to do. I tried removing the mobo battery for 5 minutes to reset the board, nothing. Ive tried to reinstall my drivers, That does not work. I Removed NETFRAME 4.0. That dose not even seam to help any. I do not hope it is a bad PCI slot, (had the motherboard for 3 years) but are there any suggestions available? Anything would be nice.

My specs are

System Manufacturer/Model Number: Compaq sr1901wm
OS: Windows XP 32 Bit
CPU: AMD X64 3600+ DUO
Motherboard: Asus A8N-LA
Memory: 1.75GB DDR
Graphics Card: Nvidia GTS 250 1024MB
Sound Card: Soundblaster 24bit
Monitor(s) Displays: Emachine E19T6w
Screen Resolution: 1440x900
Hard Drives: 1st Seagate 80GB
2ndSeagate160GB
PSU: BFG Tech 550 WATT

My System SpecsSystem Spec
.

27 Feb 2012   #2

Windows 7 64 Home Premium
 
 

Anyway you can test your card? I had a 9800gt die after I updated drivers for it and sent it back.
My System SpecsSystem Spec
27 Feb 2012   #3

Windows XP 32 Bit
 
 

Well im letting my friend install it into his 750 watt pc, to see if its power issue. I doubt it is the PSU for i have had it for around 3 years, but somehow, lately it has been going power out since about 3 months ago when i do heavy gaming. So it might be the problem, and BFG support seams to be gone now ^^" so im letting my friend borrow it. Just for 4 day.
My System SpecsSystem Spec
.


27 Feb 2012   #4

Windows 7 64 Home Premium
 
 

How long have you had your power supply? They do diminish over the amount of years you have it. Hopefully you can see its not the card then you can check If it is indeed your PSU your mobo.
My System SpecsSystem Spec
27 Feb 2012   #5

Windows XP 32 Bit
 
 

Ive had it for about 3 years now, and i just noticed a switch on the back. i never did take the time to wonder what it is. But it seams to have 2 options and its red. Im sorta nervous what it does. It has 2 settings, 150, and then 230 i think. Im not sure what that means, but its a red flick switch. Does this help control my power? its set on 150.
My System SpecsSystem Spec
27 Feb 2012   #6

Windows 7 64 Home Premium
 
 

Don't hit that one..I flicked it when I wasn't sure What it did and it blew up my supply. It's to change peer settings for different countries. It may be that you're overdrawing your power supply.
My System SpecsSystem Spec
27 Feb 2012   #7

Windows XP 32 Bit
 
 

it might be. I wont know for sure until i lend it to my friend tomorrow. Im heading over there where he has a great Azza computer where its fit with a sniper mother board, 750 watts, and a GTX 580. I hope my graphics card is compatible with the motherboard (which it should honestly) But if it was a power supply issue, wouldn't i get a brown screen at start up, indicating a power supply problem?
My System SpecsSystem Spec
27 Feb 2012   #8

Windows 7 64 Home Premium
 
 

Hmm, yeah on second thought I don't think it's likely to be a PSU problem, but I wouldn't rule it out. Chances are the cards probably faulty, or your motherboard may be having issues detecting it.
My System SpecsSystem Spec
27 Feb 2012   #9

Windows XP 32 Bit
 
 

Yah, it would be horrible if my graphics card was faulty, but i have had it for 2 and a half years with hard end gaming: or even worse, my mother board. I would have to have to buy one at a time like this, with new RAM that goes with it, or possibly a CPU that fits. I wont know until tomorrow, so ill keep this forum updated on the problem.
My System SpecsSystem Spec
27 Feb 2012   #10

Windows 7 64 Home Premium
 
 

No worries, I'll check back after work see where you're up to.
My System SpecsSystem Spec
Reply

 PCI dose not seam to detect my graphics card after NETFRAME 4.0 Update




Thread Tools



Similar help and support threads for2: PCI dose not seam to detect my graphics card after NETFRAME 4.0 Update
Thread Forum
Solved Uninstalled graphics card. Windows cannot detect it now Graphic Cards
Solved how to make device manager detect my graphics card? Graphic Cards
graphics card doesnt detect monitor correctly Graphic Cards
[Help] Can't detect graphics card or install drivers Graphic Cards
System doesn't detect Graphics Card Graphic Cards
Windows 7 won't detect GeForce 8400M GS graphics card Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:29 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33