Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Disk Management shows failed disk?

27 Feb 2012   #1
TBoyd

Windows 7 Professional 64 Bit SP1
 
 
Disk Management shows failed disk?

I just cloned my OS HD to a new Crucial M4 128Gb & it is working just fine.

I later noticed a failed disk - that is about the same size as the new M4. Screenshot is attached.

Do I dare delete this failed phantom disk? Please - no guesses!




Attached Thumbnails
-diskmgmt.jpg  
My System SpecsSystem Spec
.
27 Feb 2012   #2
TBoyd

Windows 7 Professional 64 Bit SP1
 
 

OK - I went ahead & deleted it. No ill effects.
My System SpecsSystem Spec
Reply

 Disk Management shows failed disk?




Thread Tools




Similar help and support threads
Thread Forum
Disk Management (Snap in) shows swaped Disk0=D and Disk1=C
When starting a backup (Acronis), I noticed that my C: drive was now "Disk 1" and my D: drive now "Disk 0". I verified this using Computer Management > Disk Management I had this happen with Disk2=E and Disk3=F becoming Disk2=F and Disk3=E. I've removed them from the system as a result. ...
Hardware & Devices
hard disk changed to dynamic type after using disk management
I am facing problem of unable to shrink c drive in my windows 7 home premium.I have read everyone writing in about not to change the hard disk to dynamic type,but after partitioning one time using disk management now all my partitions are dynamic type & I still have 288gb left in c drive. I need...
General Discussion
Disk management converted only disk to dynamic, will it boot?
Hi, I was going to try dual booting Windows 8 on my laptop following a guide I found, and it said to go onto disk manager and shrink a volume to create another volume. The guide after the shrink only had two disks, and I had 5 disks (A recovery disk, HP tools and a blank one, along with my C disk,...
Hardware & Devices
USB external hard disk shows up as internal fixed disk
Couple of hours ago my Windows 7 could not recognize my external USB hard disk (Maxtor Basic). It came up on Disk Management and Device Manager but not on My Computer. However I fixed it (by deleting its line off regedit in HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices, plugging out the ext. HD and...
Hardware & Devices
160 GB hard drive shows capacity of 55 GB in Disk Management
What would cause a such a large chunk of the hard drive to not appear in disk management - the capacity is approximately a third of the total drive (see attached)!? I have used TreeSize and other tools to see if there is anything out of the ordinary, such as over-sized temp folders, pagefile,...
Hardware & Devices
Need quick help about new hard disk partition on win 7 disk management
Hi to all seven forums. I bought a new 1tb hard disk, and I connected it to my pc as slave, and when I creating the partition in windows seven disk management and right click to creates new partition, it had four option. 1. simple volume 2. spanned volume 3. stripped volume 4. mirrored...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App