Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: [Q] Problems resuming from sleep with wireless devices.

01 Mar 2012   #1
1454

W7 pro x64
 
 
[Q] Problems resuming from sleep with wireless devices.

I have a Toshiba media center ir remote, logitech wireless keyboard, two logitech mice(MX anywhere, and M515) and a Rii non bluetooth wireless keyboard. When I first set the computer up I had no problems waking from sleep(S3/S4 hybrid) with the ir remote. I could put it in, and take it out of sleep. with the remote.


Also, I could get it to resume from sleep with all of the devices mentioned above. I'm not sure what has changed, but now none of these devices will wake the computer from sleep. I have to manually do it via the power button on the tower.


I have checked, and rechecked my power settings, and under device manager I have made sure the devices are checked as to being allow to wake the computer from sleep. Also, I have disabled selective usb suspend as I read that might cause the issue. But nothing worked. Last, the IR receiver blinks red when it "reads"(or receives) a signal from the remote, and when I try to power on with the remote it does blink as if it is receiving the signal from the remote. But it just won't resume. I have tried everything I can think of, so any advice would be greatly appreciated.

Oh, it's not an issue of being able to resume, I want to make that clear. I can resume, but only from the power button. It's just any user inputs that gives me issues.

Specs
Asus Fm1 pro Mobo
A8 amd
OCZ Vertex plus
Hitachi Green? HDD
Cooler master PSU
ceton infinitv4
huppage 1250
8gb kingston? ram
That's all I can remember off the top of my head, but I can get the actual brands and model #'s if needed. I don't think I have forgotten anything, but I will update if I remember anything I'm missing.


My System SpecsSystem Spec
.

03 Mar 2012   #2
writhziden

Windows 7 Home Premium 64 Bit
 
 

I see that no one responded to this problem, so I will give a possible solution. Use Hard Reset to Resolve Hardware and Software Issues (it works for all computers, not just HP Pavilions) can sometimes resolve these problems. Let us know if it works.

Also, any other suggestions from other experts in this forum would be greatly appreciated.
My System SpecsSystem Spec
09 Mar 2012   #3
1454

W7 pro x64
 
 

Quote   Quote: Originally Posted by writhziden View Post
I see that no one responded to this problem, so I will give a possible solution. Use Hard Reset to Resolve Hardware and Software Issues (it works for all computers, not just HP Pavilions) can sometimes resolve these problems. Let us know if it works.

Also, any other suggestions from other experts in this forum would be greatly appreciated.
Thanks writh. I just want to confirm a few things before I go though with this. By hard resetting I shouldn't lose my DRM content, should I? It doesn't appear as if i should lose anything from the sounds of it, but I just want to clarify. Thanks again.
My System SpecsSystem Spec
.


09 Mar 2012   #4
writhziden

Windows 7 Home Premium 64 Bit
 
 

No, a hard reset will not affect the current Windows setup or BIOS settings. It will just reset the connections with the BIOS.
My System SpecsSystem Spec
Reply

 [Q] Problems resuming from sleep with wireless devices.




Thread Tools





Similar help and support threads
Thread Forum
BSOD while resuming from sleep, or not resuming from sleep at all
My system was never able to resume from sleep. Tried several things, BIOS settings, settings for power management etc. Thought it could be related to recovery software or other installed drivers etc. But now: I replaced my harddisk with a SSD, did a fresh install of W7 Ultimate 64. Removed all...
BSOD Help and Support
Wireless network adapter missing after resuming from S3 sleep.
I have had this same thread in Networking forums with no response and am now trying it here. My adapter is always gone from resuming from sleep. I know it was working before. Just changed my ram and bios settings from a fresh build. Went from Corsair xms3 to G.Skill Ripjaws. I am having...
Hardware & Devices
Wireless Card problems after restarting from sleep mode
I have a very annoying problem with my laptop. I have a Dell XPS M1530 and I put Windows 7 professional on it. I have set it that every time I close the lid, the computer goes into sleep mode. When I open my lid, it goes onto the log in screen. Once I log in, it recconects to my router. It...
Network & Sharing
BSOD When resuming From Sleep
I've been getting the BSOD recently when resuming my computer from sleep. I was going to reformat but id like to be able to correct the problem without taking that measure if possible. This problem is recent to the last few weeks. Besides the BSOD on resume of sleep the system runs awesome ...
BSOD Help and Support
bsod after resuming sleep
anyone can check my dump file and find the cause maybe ? suspecting my sb x-fi my self. 060211-6988-01.dmp used to be 100% stable my rig but now it bsod sometimes after resuming sleep.
BSOD Help and Support
Resuming from sleep...
...will not connect me back to internet. It just says unidentified network and no internet access, solution is to disable and enable my adapter but it gets quite annoying. I've noticed this before on my bro's laptop but solution to stop it from happening was never found. I got asus P5Q-Pro...
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:51.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App