Converting ext. drive to internal. Tried Initialising, now shows RAW.

I am trying to install my external drive as an internal drive (SATA connection, 3.5") without losing any data that I already have stored. It will not be used as a boot disc, only storage.

I've taken 3.5" SATA drive from the enclosure and connected to my system, but can't get it to access the existing NTFS file system. At first, the drive wouldn't show up in "Computer", so I looked around and found it listed as "unallocated" in the "Disk Management" area.

Now here's where I may have messed something up. I tried to initialize after reading advice from other forums, and believe (can't remember) that I chose to create a new volume. I was hoping this would allow the drive to read, but I was then prompted to format before I could use the drive. I did not format, and was hoping I could reverse what I had done, but now my drive shows up as having a RAW file system. Is there any way to get this to read, or even reverse the new volume so I can at least load it back in to the external enclosure to make a backup?

Both EaseUs Raw File Recovery, Raw Partition and Drive Recovery Software for hard drive data recovery. and MiniTool How to recover data from RAW hard drive? may be good to recover data from a RAW drive but the trial versions will only recover less tha 1GB of data.

If you want to go the freeware way then try TestDisk TestDisk - CGSecurity . Go through the documentation very carefully and try to understand as much as you can. Its usage can be a little bit daunting to the new users. It has got many advanced features but limit yourself to rewriting the partition table and/or copying the file and never click on any other tabs without understanding what they do.

Go through my thread Regain a lost drive using Test Disk - An Illustrated Guide to familiarise yourself further and help yourself.

To bolster your confidence, just go through this user experience in a recent thread. [Solved] RAW hard drive recovery - Hard-Disks - Storage

Good luck.

EDIT: http://www.recoverdeletedfile.info/ This was also suggested in the above thread and you may try it first, if you are hesitant to use TestDisk straightaway.

Thanks for all the tips IIllytch321 & jumanji

I''m really interested in the TestDisk since it's free for more than 1gb, but I'm not sure how to proceed after reading your thread Regain a lost drive using Test Disk - An Illustrated Guide. Part 2 where you talk about recovering an unallocated drive is what I should have read yesterday before I made the mistake of trying to initialize the drive. But now that I did the initialize I'm showing an unformated raw drive with a free huge partition. Do you know if this program can be used to delete the volume I created and return the entire drive to unallocated space?

Thanks for the EXTREMELY fast replies. I'm using testdisk to analyze the disc now, and it looks like it may take awhile with the size of the drive. I'll see what this finds and go from there.

This is the result when analyzing in testdisk. Right now I have it running a deeper scan, and I'm estimating that will take about 11 hours. Would it make a difference if I put the drive back in it's enclosure and connect through USB, like I originally connected it? Right now I have it mounted internally and connected with a serial ata cable.

Really difficult for me to answer this query since you have removed it from the enclosure and connected it internally.

I would have preferred not to complicate it in any manner since we are already in a dark alley :).

In any case do not break the process midway. Let it complete whatever it does and then - and if it does not show any worthwhile info to recover - you can quit, put the HDD back in its original condition and try running TestDisk again.