|12 Mar 2012||#1|
| || |
64Bit Ult won't Boot when 'Memory Remap' is Enabled to use all 4GB RAM
I will start off by stating my relevant PC Specs for this thread:-
Asus P5B Deluxe MoBo
Intel Dual Core E6600 @ 2.40GHz
GeForce 7900 GS 512Mb
2 x 1GB DDR2 800MHz Corsair Value RAM (original) in Yellow Slots A1 & B1
2 x 1GB DDR2 800MHz Corsair Gaming RAM (NEW) in Black Slots A2 & B2
So I have just installed 2 extra GBs of RAM to bring my total to 4GB. After a successful boot and then checking my 'System' info Windows states 4.00GB of memory is installed but only 2.94GB is usable.
Therefore I went ahead into my BIOS to enable the 'Memory Remap Feature'.
However on reboot the PC gets to the 'Starting Windows' screen and doesn't get any further. The Windows logo doesn't start to appear. It just restarts going through all the usual screens again, eventually giving two options of:-
Launch Startup Repair
Start Windows Normally.
The repair never works and Windows will never start normally again until I return to the BIOS to disable the mem remap.
Sometimes I have had a Blue Screen as per this thread:-
I reset the CMOS to Factory Default settings and tried again but did nothing. Also I have never updated the BIOS from the original version as I'm a bit scared to do so.
I can't find anyone else on the net having the same problem!
CAN ANYONE HELP?
This is the first time I have ever had to ask for help on a PC Forum! Have always managed to resolve any issues myself, with friends or by researching the net.
Have read about graphics card using part of the mem (which doesn't seem right with the 7900 GS as has it's own onboard mem) and also that voltages to the RAM should be increased.
Windows 7 :: Win 7 Wont Boot With 4GB RAM
Windows 7 RC won't boot with 4gb
I have looked hear for info on voltages and clocking but didn't get anywhere. Well got an overclock at 3.60Hz but only ran in Safe Mode. Obviously this is slightly irrelevant the above but was just trying stuff out and trying to learn more.
Asus P5B-Deluxe: Overclocking and Tweaking Guide - The Tech Repository Forums
Tried clock as per this vid and work perfectly running at 2.88GHz.
e6600 and asus p5b overclocking tutorial in english stage 1 - YouTube
Although some areas in BIOS grayed out such as 'Vanderpool Technology' whatever that is. Guessing isn't grayed out on the updated BIOS.
|My System Specs|
|Similar help and support threads for2: Win 7 Ult 64Bit Won't Boot when 'Memory Remap Feature' is Enabled|
|How to make the internal wireless adapter be enabled on boot?||Hardware & Devices|
|Slow boot with Microsoft's Client for NFS enabled||General Discussion|
|64Bit Ult won't Boot when 'Memory Remap' is Enabled to use all 4GB RAM||Performance & Maintenance|
|Memory remapping enabled causes reboot when waking from sleep||Hardware & Devices|
|Enable the memory remapping feature!||Performance & Maintenance|
|Win 7 does not Boot when Secure virtual machine mode enabled||Virtualization|
|Having Memory Remap Feature Enabled Causes BSODs||BSOD Help and Support|
|Our Sites ||Site Links ||About Us ||Find Us |
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd
All times are GMT -5. The time now is 07:30 PM.