Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't find my Memory-clock latency

17 Mar 2012   #1
Supdoc

win7
 
 
Can't find my Memory-clock latency

My memory:
MXD3C13334GS :: Memory :: Products :: Mach Xtreme Technology

There is no note on the stick upon the memory sticks;
Right now the CL is 9-9-9-24 (auto in bios)

Is there anyway to find out whats the true CL ?

I know that bad voltage settings may cause a bad mem test and BSODS.
wrong CL settings may have a similar effect ?



TIA


My System SpecsSystem Spec
.
17 Mar 2012   #2
profdlp

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
 
 

Run CPUID and click on the "Memory" tab. It's not foolproof, but it will tell you what the BIOS reads it as.
My System SpecsSystem Spec
17 Mar 2012   #3
Supdoc

win7
 
 

it doesn't show what it should be, only what already set on the bios, which i ALREADY KNOW
My System SpecsSystem Spec
.

17 Mar 2012   #4
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

No need to get snippy.

Run Memtest86+. It will report the latencies during the test.
Memtest86+ - Advanced Memory Diagnostic Tool
My System SpecsSystem Spec
17 Mar 2012   #5
smarteyeball

 
 

Quote   Quote: Originally Posted by Supdoc View Post
it doesn't show what it should be, only what already set on the bios, which i ALREADY KNOW
Plenty of apps out there which will tell you what you don't.
My System SpecsSystem Spec
17 Mar 2012   #6
Supdoc

win7
 
 

those apps only tell you what's already configured on the bios...
http://i.imgur.com/VGuok.png
http://i.imgur.com/AqxxD.png


you see?


When you set the timings on "auto", it doesn't necessarily gives you the best result..

I guess ill just ask the manufacturer
My System SpecsSystem Spec
17 Mar 2012   #7
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Yes, ask.

I looked up the RAM from your link and a few other sources and nowhere do they tell you the timings for their RAM! Absolutely unacceptable!
My System SpecsSystem Spec
17 Mar 2012   #8
profdlp

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
 
 

Quote   Quote: Originally Posted by Supdoc View Post
it doesn't show what it should be, only what already set on the bios, which i ALREADY KNOW
The "Auto" settings adjust it according to what the SPD on the RAM tells them. That's the manufacturer's default right there.
My System SpecsSystem Spec
17 Mar 2012   #9
carwiz

Windows 7 Pro-x64
 
 

I think the OP wants a display of what the CL can be. In other words, the available options. At least that's what I get. That should be shown on CPU-Z. But they only go lower, not higher in performance. The memory will be set, by the BIOS, to it's highest capability indicated by manufacturer's encoding. The JDEC specs are shown in CPU-Z.

If you're looking for all possible combinations of the timings for a particular module, there aren't any. That's not what JDEC does nor any manufacturer that I know of. If you want to go outside of the specifications for a particular module, YOU do that.
My System SpecsSystem Spec
17 Mar 2012   #10
GeneO

Windows 10 Pro. EFI boot partition, full EFI boot
 
 

^This, The SPD tab should show you the valid timings the memory supports. Of course the memory doesn't have to report any JDEC or XMP profiles I suppose. If it doesn't I'd throw it out and get a known good brand.
My System SpecsSystem Spec
Reply

 Can't find my Memory-clock latency




Thread Tools




Similar help and support threads
Thread Forum
DPC Latency Checker shows problem but I can't find it
I was getting some clicks in my recording studio system and ran the DPC Latency checker. It shows a problem, which I can't find (if it really is a problem). However, the clicks in my recording program went away after I changed the buffer size for my USB connected recording device (a Roland...
Performance & Maintenance
what is gpu clock and memory clock?
i have a new graphics card installed and it has options to change the clock and stuff... could you tell me what each one does and stiff about it thanks!
Graphic Cards
[Find] Media & Clock Gadgets or Widgets
I Need Media Gadgets For My Desktop But I Need Settings That Gadgets Link to AIMP3 Not WMP. Can Anyone Recommend ? And One Gadgets for Digital Clock With Settings for London, UK Time
Gadgets
GPU clock / Memory clock always at max value
Hello, I'm having a problem with my graphics card, a 1GB ATI Radeon 5870HD. Most of the time, the GPU/memory clock speeds of the card operate at three levels: 157Mhz/300Mhz when idle, 400Mhz/900Mhz when playing a video or another 2D application, and 800Mhz/1200Mhz when under full load. ...
Graphic Cards
Where can i find this Clock Gadget?!
I've been looking for this clock shown in the picture in the top left of the desktop. Anyone know where i can find a clock like that?
Gadgets
Where Can I find This Clock
I cannot find this clock :mad:
Gadgets


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App