New
#11
Yup i tried all ports including the front panel. All ports are not working. I already tried re-installing it from device manager. Still nothing happen.
Yup i tried all ports including the front panel. All ports are not working. I already tried re-installing it from device manager. Still nothing happen.
I dunno the exact Model but in the Mobo it says IBM rev 1.6
I found these on dxdiag:
Model: 8191LG2
BIOS: PhoenixBOIS 4.0 Release 6.0 for IBM NetVista
Things to check:
I've seen boards where something in the BIOS is disabled but Windows can still detect it. Worth checking.
I'd also try temporarily disconnecting any of the case USB ports from the motherboard and just use the built-in ports. If there is a bad or shorted wire somewhere it could be messing up the whole works.
Have you run the Intel driver updater?
You could also try downloading a bootable version of a Linux distro and see if the USB works with that. If it does then we know the board is OK and it's a Windows problem.
I will try all your suggestions later when I got back home. Thanks for your patience. It is much appreciated. :)
Last edited by sk0t0s; 02 Apr 2012 at 02:15.