Asus m4n98td evo - usb root hubs

Page 2 of 2 FirstFirst 12

  1. Nomad8459
    Posts : 171
    Windows 7 64 bit
    Thread Starter
       New #11

    TBH, the only other thing on there is the USB keyboard, using one out of six slots!

    The hard drive even has one of those Y usb cables.
      My Computer
    Quote Quote

  3. PaulSoebekti
    Posts : 69
    Win 7 64 bit
       New #12

    I have one of the early 2.5" enclosures (Vantek USB2) that came with two USB plugs (one mini-USB plug leading out of the enclosure - then it splits into two USB plugs). The transfer rate sometimes dropped and requires both USB plugs to be connected to come to its intended transfer rate. Do we have the same harddrive cable here, I wonder.
    Sorry, I'm out of suggestions to help here.

    Paul
      My Computer
    Quote Quote

  4. Nomad8459
    Posts : 171
    Windows 7 64 bit
    Thread Starter
       New #13

    That's Ok, it was a long shot asking on here, all the devices are working properly except the hard drive seem to be working properly, but to be honest, it has always been a little tempremental anyway, but I would have thought with it being a HDD that it would require the Hi speed controller, the Hi speed controller was originally devised for HDD type things according to that document that you found.

    i will live with it, it does recognise it and transfer data and I don't use it that often, but it just struck me as odd.
      My Computer
    Quote Quote

 
Page 2 of 2 FirstFirst 12

  Related Discussions
After a 'convoluted' clean install of Windows 7 Professional 64bit on a pre-installed Windows 8.1 system I seem to be missing all the USB Root Hubs although the USB3 hubs are there and I have reinstalled the Intel chipset drivers. All the USB ports are working properly both USB2 and USB3 but when...
Ok, so I've run into a very tricky spot: Yesterday, I successfully resolved a windows update issue (thread can be found here: https://www.sevenforums.com/windows-updates-activation/301935-unable-get-any-updates-all-error-800f0900.html ). Basically, one problem led to another and I ended up...
About three months ago I upgraded to this Motherboard (M4N98TD Evo) as my previous motherboard died (M4N72-E), The transition seemed to go very smoothly apart from the fact that I am still struggling for absolute stability. I know what my old board was capable of running these components at and...
USB Hubs
in Hardware & Devices

Any tips for decent USB hubs?
USB Hubs and Devices
in Hardware & Devices

I have an Abit IP35 Pro motherboard which has 2 ports that are USB2. When I plug my gaming mouse and my SteelSeries 5HV2 USB sound card which are both USB2 and check under USB Root Hub devices, it shows that they are running in Full Speed and not on the High Speed USB Root Hubs. I thought all 4 USB...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 07:58.
Find Us