Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: can not load windows 7 on new system

13 May 2012   #1
toppergraph

windows 7 home premium 64bit
 
 
can not load windows 7 on new system

i have just upgraded my system with:

gygabyte ga-a55m-ds2 MB
8 gig ram
500g w digital HDD
amd Llano a4-34000 fm1

when i try to install windows 7 64 or 32 bit it stops and informs me that files are missing or corrupt and will not continue the software im using has been fine its gone on lots of machines with no problems.

i`ve upgraded the bios to the latest rev. But problem persists my dealer has changed the mother board still same.
i did manage to install win 7 64b once it lasted to beyond sp1 (about 5 hrs use)
half way through windows index test it Blue screened on me and would not reboot.

since then i can not reinstsll windows.also my dealer replced the hard drive.
on some attempts off reinstall i can check using windows dianostic, it reports hard ware errors.
is it possible its the cpu?its all thats left.

anyone help?

topper


My System SpecsSystem Spec
.
13 May 2012   #2
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

do you have a Win 7 DVD? yes/no

Where did you get the DVD?
My System SpecsSystem Spec
13 May 2012   #3
toppergraph

windows 7 home premium 64bit
 
 

yes downloaded iso from digital river with sp1.
My System SpecsSystem Spec
.

13 May 2012   #4
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Good.
Wipe the hard disk clean using DiskPart.

Install Win 7.

CLEAN A HARD DISK PRIOR TO WINDOWS 7 INSTALL USING YOUR WINDOWS 7 DVD

TURN OFF THE COMPUTER WITH THE DVD TRAY OPEN
Turn on your computer.
Open the DVD door.
Turn off the computer with the DVD door open.

BOOT FROM YOUR WINDOWS 7 DVD AND GO TO A COMMAND PROMPT
Insert the Windows 7 DVD and close the DVD door.
Power on your computer.
When that very first dialog appears where you would normally push the NEXT button, then use the SHIFT + F10 key combo to get to a command prompt.
The command prompt will be X:>


USE THE DISKPART PROGRAM TO “CLEAN” THE HARD DISK
Type the commands shown, hitting the Enter key after each.

Do not proceed to the next command until the current command is finished.

DISKPART (the command prompt will change to DISKPART>)
LIST DISK (this will list the disks present)
SELECT DISK 0 (assuming disk zero is the desired hard disk)
DETAIL DISK (this will show you info regarding the disk you selected)
CLEAN ALL (this is the command to write zeros to entire disk)
This can take half a day for a 2 Terabyte disk.
EXIT(this will exit you from the DiskPart program)
EXIT(this will exit you back to the Windows 7 install program)

Now carrry on with the install of Win 7
My System SpecsSystem Spec
13 May 2012   #5
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

But if the installation fails after doing that ^

Many times when installation fails due to hardware errors it turns out to be dodgy RAM. There can be a few reasons for RAM errors.

Sometimes the issue can be worked around by installing just one RAM module in the first RAM slot during installation. Switch to the other if that does not work.

And make sure that you have not overclocked, or performed any performance tweaks in the BIOS settings before you attempt an install.
My System SpecsSystem Spec
13 May 2012   #6
toppergraph

windows 7 home premium 64bit
 
 

i have solved the problem ddr3 in slot 2 was the problem i have now removed and all is ok . This was replaced last week by my dealer so was the last thing i expected.

thanks for your help anyway.

best regards topper.
My System SpecsSystem Spec
13 May 2012   #7
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Glad to hear it!

That stick of RAM that was in slot 2 is either defective or is mismatched (not compatible with the system). If you got this from a retail dealer they should replace it with a compatible product.
My System SpecsSystem Spec
13 May 2012   #8
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

topper,
Many thanks for getting back to us with the resolution.

Before I go to a store to buy ram, I've already been to the mobo mfg/s website to determine correct ram sticks.

Never trust the chaps at the store especially if they are from the creek squad.
My System SpecsSystem Spec
Reply

 can not load windows 7 on new system




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows failed to load because the system registry fie is missing..
Status: 0xc0000001 Info: Windows failed to load because the system registry fie is missing or corrupt How do I fix this without using installation disks(or any other disks)?? http://i60.tinypic.com/35l9d8k.jpg Thanks! :)
Software
Windows will not load, hangs at 'loading operating system' during boot
My wife's computer crashed yesterday. She got a blue screen and then it rebooted. When it boots it will load the BIOS but then just hangs on a screen that says loading operating system. I tried using the win7 recovery disk, but it was unable to repair the startup issue. I am also unable to select...
General Discussion
Windows won't load and system repair disc won't run
I have put the d drive at the top of the list in the boot set up, but the system repair disc doesn't show up and I just get a blank screen. When I open safe mode, some windows files load up and the safe mode screen opens but not with a way to start up windows. Safe mode with networking or command...
General Discussion
windows 7 refuses to load and system repair wont load
I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not...
BSOD Help and Support
SATA drivers - Load in Windows System Image Recovery
How to Load SATA Drivers in Windows System Image Recovery This will show you how to load the SATA drivers in System Image Recovery in Windows 7. When you try to Re-Image in Windows 7 , Re-Image can not find your Backup Hard Drive.
Tutorials
Windows will not load, Continuous boot to System Recovery partition.
My computer seems to be stuck in a loop. I cannot figure out how to get windows to boot. Every time I turn my computer on, whether I try to boot normally, to safe mode, etc. all I get is the System Recovery partition. It will attempt to do an automatic startup repair, and then display a window that...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App