Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Intel DH67BL Motherboard Issue

17 May 2012   #11
carwiz

Windows 7 Pro-x64
 
 

The card probably wasn't seated or dust got into the slot. Two weeks? That PC shop must be very busy.


My System SpecsSystem Spec
.
28 May 2012   #12
Edward Cullen

MS Windows 7 Ultimate 64-bit SP1
 
 

hello again experts i want ur help again i got my new MB replaced from service center but after installing everything now new problem happening my computer is powering on automatically i checked everything from cabinet to ram graphics card and everything is good pls tell me wht is the problem there ??? did they sended the broken MB ??
My System SpecsSystem Spec
28 May 2012   #13
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

Quote   Quote: Originally Posted by Edward Cullen View Post
my computer is powering on automatically
What exactly do you mean?

We need more details.
My System SpecsSystem Spec
.

28 May 2012   #14
Edward Cullen

MS Windows 7 Ultimate 64-bit SP1
 
 

Quote   Quote: Originally Posted by ignatzatsonic View Post
Quote   Quote: Originally Posted by Edward Cullen View Post
my computer is powering on automatically
What exactly do you mean?

We need more details.
ok while turning on my ups computer starts without pressing power button of cabinet
My System SpecsSystem Spec
28 May 2012   #15
carwiz

Windows 7 Pro-x64
 
 

Check to see if you have the power button leads attached to the correct pins on the motherboard. I think the alternate power pins are for normally closed (NC) switches.

As a side bar; Why are you turning off the UPS?
My System SpecsSystem Spec
29 May 2012   #16
Edward Cullen

MS Windows 7 Ultimate 64-bit SP1
 
 

Quote   Quote: Originally Posted by carwiz View Post
Check to see if you have the power button leads attached to the correct pins on the motherboard. I think the alternate power pins are for normally closed (NC) switches.

As a side bar; Why are you turning off the UPS?
as i said i checked everything frm hardisk to cabinet pin graphics card rams on my nephews pc which is same as mine pc.

wht do u mean by turning off ups ??
My System SpecsSystem Spec
29 May 2012   #17
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

He means that you said that the problem occurs when you turn on the UPS. That would mean that the UPS was off. Curious as to why the UPS was off in the first place.

Most people who use UPS leave them on constantly.
My System SpecsSystem Spec
29 May 2012   #18
Edward Cullen

MS Windows 7 Ultimate 64-bit SP1
 
 

Quote   Quote: Originally Posted by TVeblen View Post
He means that you said that the problem occurs when you turn on the UPS. That would mean that the UPS was off. Curious as to why the UPS was off in the first place.

Most people who use UPS leave them on constantly.
my ups is always on wht kind of ups u use ?? my ups has a power button which i press first then have to press the power button of cpu
My System SpecsSystem Spec
29 May 2012   #19
carwiz

Windows 7 Pro-x64
 
 

I guess I'm dumber than I sound but just so we're on the same page, a UPS is an Uninterpretable Power Supply and has a battery (or batteries) that will automatically transfer the load to an internal inverter should the line supply voltage go below a predetermined voltage. I am NOT talking about a PC power supply. You said you're having the problem when you are turning on the UPS. If you turned it on, it must have been off at some point.

If you are referring to the PC power supply then please so state but that is not called a UPS.

In any case, it sounds like the PC power button is faulty, if you've checked everything else. Does the PC startup on it's own with the power button leads disconnected?
My System SpecsSystem Spec
29 May 2012   #20
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

And it (UPS) does not mean a surge protection power strip either!
My System SpecsSystem Spec
Reply

 Intel DH67BL Motherboard Issue




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Does this motherboard Intel DG41RQI support UEFI?
I recently updated the bios, for first time after purchase. It was purchased in 2009. After I updated bios, I got lots of new options in the bios menu. Like Core Multiplexing, CPU fan control, Usb port disabling, Hard disk predelay, Expansion card text, XD technology, Intel VT, Booting USB...
Hardware & Devices
Intel Q8400 Motherboard Comparison!
I came across a MB on Craigslist and I'm wondering what you guys thought of it? I'm not the sharpest tool in the shed when it comes to computer hardware so any input would help, thanks? Motherboard link: Intel Q8400 Core2Quad & Lanparty x48 Motherboard
Graphic Cards
can i change my intel chipset by just replacing motherboard
hey i have intel g33 chipset and dual core processor :) i just want to know can i change my chipset by just replacing my motherboard which support my processor. for ex core2duo processor support g33 chipset as well as g41 chipset
Hardware & Devices
Intel SSD 520 Series SATA 3 is it ok to my motherboard?
Hi im planning buy an Intel SSD 520 Series SATA 3(60gb), I looked at the website of my motherboard(Gigabyte GA-H61M-USB3-B3 ) I'm not sure if it has SATA 3 since I won this motherboard in a contest. I also want to know if I can see any difference between loading at startup in Windows and...
Hardware & Devices
New Intel i5 build advice needed-motherboard
I will be building my mother a work machine and I will be building it around the Intel i5-750 2.66ghz CPU and I have picked out two possible motherboards...the Gigabyte-p55a-UD3 and the Asus P7P55D-E (both on Newegg.com where I will be ordering). Anyone have any ideas,thoughts, or experiences with...
PC Custom Builds and Overclocking
Intel DX48bt2 motherboard
I cant seem to find mention of DMA settings for the hard drives in device management. All the drives are sata, I have no IDE drives and IDE is disabled in bios. What got me looking at this is because when accessing a couple of my drives, there can sometimes be a pause before it starts reading...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App