Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: How to identify "other" PCI device that did not load correctly?

25 May 2012   #1
zapp22

Windows XP Pro SP3, Windows 7 Pro 32-bit, Windows 7 Ultimate 64bit, Windows XP Home SP3
 
 
How to identify "other" PCI device that did not load correctly?

guys - I'm rebuilding/resurrecting a laptop - a past-generation gaming asus unit, core 2 duo, nvidia, etc etc. its all loaded up and running, but in device manager are listed a parent "unknown" device with three sub-components underneath, unknown. so I need to fetch device drivers, but don't know what these rascals are. the big things are ok. the detail does give us the PCI info:
PCI Bus 7, Device 3, functions 2-4.

how do I go about this?
thx
z


My System SpecsSystem Spec
.
25 May 2012   #2
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

Do you see a "details" tab in properties when you are in Device Manager?

I saw your thread at geekhack.org regarding the keyboard. Did you get it fixed???
My System SpecsSystem Spec
28 May 2012   #3
zapp22

Windows XP Pro SP3, Windows 7 Pro 32-bit, Windows 7 Ultimate 64bit, Windows XP Home SP3
 
 

I removed the keyboard... sure hope putting the new one back in is easier. the little anchors on the underside were an unnecessarily tight fit and it bent in removal. if the new one is same I will shave them a little bit.

as to the device - it seems to be the ricoh sd/mem card reader and it has more than one 'device' associated. I have not located windows 7 drivers - I got half of it installed using the old vista x64 drivers from asus. I need to find the correct driver set - It is a common component used in a lot of intel-chipset-based notebooks
My System SpecsSystem Spec
.

Reply

 How to identify "other" PCI device that did not load correctly?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management
Hi Guys, any ideas how to access my external hard drive device manager can see it but it does not appear in disc management. I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management. Please check the attached screen...
Hardware & Devices
Hard Disk can't read in "my computer ", "initialized",I/O device error
I have a big problem here, I have used my hard disk for 9month, Yesterday when I watched movie on the half way, My hard disk suddenly disfuntion, And I thought my laptop problem due to always lagging so I restart my computer. But after that I can't read my hard disk (WD)in my computer. It can...
Hardware & Devices
"load device drivers" prompt while installing windows 7 via usb
Hi great guys at SevenForums. its me again...and this damn ASUS. anyway, I have attempted to install windows 7 via usb to my system(system specs under profile), but i receive a prompt about device drivers and i cannot continue. The image is an original .iso for windows 7 home premium, downloaded...
Installation & Setup
Can't ID driverless devices "Base System Device" and "Broadcom USH"
There are 2 devices in the "Device Manager" that do not have drivers installed. I just did a clean install of Window 7 SP1 32-bit to a Dell Latitude E6500. I have uploaded all the Windows updates and all seems to be performing well. However, there are two devices in the "device manager" that do...
Drivers
Hard Drive "Not Initialized", "device is not ready",won't recognize
I used a DriveWire - Universal Hard Drive Adapter (IDE / PATA / SATA to USB HDD Adapter) to hook up A 3.5" Hard Drive (Samsung model HD502HJ) to my desktop in an attempt to get my wife's files off her old desktop machine and merge them into mine. It all started off fine, the drive was recognized...
Hardware & Devices
"Select Proper Boot Device" now "NTLDR is missing"
Computer Specs: CPU: I5-2400 MB: Asus Pz868 Ram: Corsair 8GB Vengeance LP Using on board VIdeo For now Maxtor HD Sata WD Raptor Sata HP Lightscribe DVD-r Drive Sata Problem I was having once I completed my new build with old system parts was as listed in title. It started out as select...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App