Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: Remove "active'portion of HardDrive

29 May 2012   #1

7 Professional 32bit
 
 
Remove "active'portion of HardDrive

Another hard drive issue to sort out!
Background:
I was given a a computer by a friend, which seems to have MOBO issues, so was no longer wanted. But a lot of the components are still OK including the 200Gb harddrive, which was the only HDD in the computer. I attached it to another computer and overwrote the whole drive with CCleaner, and then formatted it using full format.

In the attached 'snip', it is drive D, you can see it is described as "Active".

Is there any way to now delete the Active attribute and end up the same as drive F [in the snip] /

Your help would be greatly appreciated.
Thanks Greg



Attached Thumbnails
Remove "active'portion of HardDrive-capturehdd.jpg  
My System SpecsSystem Spec
.

29 May 2012   #2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Open an elevated command, type:

Diskpart

sel vol d

inact

exi.

press enter after each of the above commands.

Should take about 5 secs to do it.
My System SpecsSystem Spec
29 May 2012   #3

MS Windows 7 Ultimate SP1 64-bit
 
 

run cmd.exe as administrator.
Diskpart
list disk
select disk 0
detail disk (to make sure you got the correct disk)
inactive
exit
exit
My System SpecsSystem Spec
.


30 May 2012   #4

7 Professional 32bit
 
 

Hi and thanks.
Ran the commands as suggested by karlsnooks, went OK up to entering "inactive"
Please see snip of Command.
What do I enter/how do I select the partition please?
Greg


Attached Thumbnails
Remove "active'portion of HardDrive-hdd-cmd.jpg  
My System SpecsSystem Spec
30 May 2012   #5

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Follow the commands in my post instead


Sometimes I don't know why I bother posting.
My System SpecsSystem Spec
30 May 2012   #6

MS Windows 7 Ultimate SP1 64-bit
 
 

aussiegreg,
Sorry about that. Go again and add the select partition 1 command.

run cmd.exe as administrator.
Diskpart
list disk
select disk 0
detail disk (to make sure you got the correct disk)
select partition 1
inactive
exit
exit
My System SpecsSystem Spec
30 May 2012   #7

7 Professional 32bit
 
 

Thanks to both of you, I've followed your advice and achieved the result.

To SIW2, you bother posting because you have a lot of valuable knowledge to impart.
And I for one admire and am grateful for the help that people like you offer so readily.

Sometimes however, to us non geeks, we feel more comfortable when things are spelt out in greater detail.

And sometimes, where experienced people like yourself, are so close to and totally familiar with their work, they may not understand that another person, doesn't have the same understanding of what is required.

For instance, this is only the second time I have used 'Command' prompts to solve an issue! And as you said, [once I grasped it], it only took about 5 sec to do it.


This is not a criticism, nor is it meant to be condesending in nature, just an observation from my personal experience.

There should be no doubt how much I appreciate the time taken and the willingness to offer advice. I for one would be lost without it.

Regards GREG.
My System SpecsSystem Spec
30 May 2012   #8

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Yep, sometimes I forget.

Glad you got it sorted out, Greg.
My System SpecsSystem Spec
Reply

 Remove "active'portion of HardDrive





Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:36 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33