Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Which one to get? Corsair Value Select vs G.Skill NT

07 Jun 2012   #1

Windows 7 Ultimate x64 SP1
 
 
Which one to get? Corsair Value Select vs G.Skill NT

I have P5G41T-M LX MoBo and it has only 2 Memory Slots of DDR3 1333. Above 1333 would be useless to get. Which one is better in terms of performance, timings etc.? Need to buy 2x 4GB modules (Total 8GB Dual Channel).

1. Corsair Value Select 4GB DDR3 1333
Corsair Memory

2. G.Skill NT 4GB DDR3 1333
G.SKILL NT 4GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600)


My System SpecsSystem Spec
.

07 Jun 2012   #2

Microsoft Community Contributor Award Recipient

Windows 7 SP1, Home Premium, 64-bit
 
 

If you want to believe Newegg, they appear identical in their specs. They might have different subcomponents and different quality control.

I'd buy on the basis of return policy, price, and support.

Unless one turns out to be faulty, I'd be very surprised if you could tell which was in your PC.

GSkill:

Cas Latency: 9

Voltage: 1.5V

Timing: 9-9-9-24

Corsair:

Cas Latency: 9

Voltage: 1.5V

Timing: 9-9-9-24
My System SpecsSystem Spec
07 Jun 2012   #3

Windows 7 Ultimate x64 SP1
 
 

Hmmm Corsair costing me very little more than GSkill.. I never used GSkill before and mostly used Corsair but had faulty rams few times... U r right there specs they are same and both have limited life time warranty!
My System SpecsSystem Spec
.


07 Jun 2012   #4

Windows 7 Ultimate x64
 
 

I've been using g.skill exclusively for the past 5 years and haven't had a single issue.
My System SpecsSystem Spec
07 Jun 2012   #5

Windows 7 home premium x64
 
 

Normally I would go with G.skill, but having read the spec. it specifically says it's single channel memory, it doesn't always mean it won't work in dual mode but I'd check it out first.
I agree with ignatzatsonic I would be very much amazed if you could tell the difference.
My System SpecsSystem Spec
07 Jun 2012   #6

Windows 7 Ultimate x64
 
 

There is no such thing as "dual channel" memory.

here is an article right from crucial explaining it;
Crucial FAQ - Answer
My System SpecsSystem Spec
07 Jun 2012   #7

Windows 7 Ultimate x64 SP1
 
 

pparks1 im also thinking to get GSkill this time actually i wanted to buy GSkill Ripjaw X series DDR3 1333 but unfortunetly they are only available in 4GB kits (2x 2GB) and not available in 8GB kits (2x 4GB) anywhere here. But NT series caught my eye
My System SpecsSystem Spec
07 Jun 2012   #8

Windows 7 Ultimate x64 SP1
 
 

Thanks for the link pparks it is useful to clear the concept. Cyclic if i will buy 2 same modules so they will be on dual channel mode by motherboard.
My System SpecsSystem Spec
07 Jun 2012   #9

Windows 7 Ultimate x64 SP1
 
 

Both are apparently good brands, but I have no experience with GSkill. I will say, however, it is tough to beat Crucial in terms of support, service, and quality.
My System SpecsSystem Spec
07 Jun 2012   #10

Windows 7 Ultimate x64 SP1
 
 

Hmmm i'll look for Crucial mems but dont know where they will be available but people are using Crucial rams as i seen on local forums
My System SpecsSystem Spec
Reply

 Which one to get? Corsair Value Select vs G.Skill NT




Thread Tools



Similar help and support threads for2: Which one to get? Corsair Value Select vs G.Skill NT
Thread Forum
Am In Need Of Higher Resolution Skill than 1366x768 Graphic Cards
Solved Help needed with G.Skill ram timings to get all or most of their speed PC Custom Builds and Overclocking
G.Skill Hardware & Devices
Overclocking 1055t with g.skill 8gb PC Custom Builds and Overclocking
How Would You Rate Your Computer Skill Level? General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:41 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33