Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: NZXT M59 Cable Management, showing off.

11 Jun 2012   #1
Surgikill

Windows 7 64 bit
 
 
NZXT M59 Cable Management, showing off.

Don't know if this is the right place to post this but I *finally* have gotten my cable management to near perfection, or at least I think so. Very proud of myself that I finally figured it out. Check it out and tell me what you think, I will provide some before and after pics. Photobucket link is below.

Computer pictures by Halofreak131313 - Photobucket


My System SpecsSystem Spec
.

12 Jun 2012   #2
cyclic

Windows 7 home premium x64
 
 

Routing cables can be troublesome, especially with multiple HDD's and graphics cards as you have. You have done good as they say, there's only so many ways of running those bad boys, looks like you nailed it.
My System SpecsSystem Spec
12 Jun 2012   #3
Surgikill

Windows 7 64 bit
 
 

Thanks this was my first real build. If I had a larger case that was a little wider (this one is only 7.5 inches wide which leaves little room between panels) I wouldn't have had so much trouble with the atx power, had to squish it all out in order to get the darn panel on.
My System SpecsSystem Spec
.


Reply

 NZXT M59 Cable Management, showing off.




Thread Tools





Similar help and support threads
Thread Forum
SSD not showing in Disk Management, but showing on Intel Rapid Storage
Evening! Have recently formatted my laptop and re installed Windows on my normal HDD because i have a small SSD since formatting my SSD and deleting and renewing the old partition, in windows explorer and disk management i can no longer see my SSD. I can see my SSD in Bios and in the Intel Rapid...
Hardware & Devices
Casing Cable Management
Hello everyone and I have some question with regards to the new case I am changing... So, I am upgrading my case to Corsair Carbide 400R and I was wondering about the cable management for my Seasonic S12II PSU. I mean, are the cable in this PSU long enough to route it properly? Is there any tips...
PC Custom Builds and Overclocking
Cable Management on an Antec 300
Anyone know a way to manage cables on an antec 300 case? right now all my cables are everywhere and block airflow... Also I do not want to cut any ANY openings into my case...
PC Custom Builds and Overclocking
Looking for Cable management tips.
Hey,I'm new and I was looking around and well this is the only place that seemed right. I have a problem with my cable management in my case (antec 900) does anyone have any tips that would be very helpful also if I posted this in the wrong place or if there's a thread for this please tell me....
PC Custom Builds and Overclocking
Cable Management
Hi guys. After the recent acquisition of new hardware for a new PC, I am now questionning myself about cable management. Yes, I'm getting ahead of myself a bit here but I want to see your tricks and tips ahead of time! Thanks for your tips in advance!
PC Custom Builds and Overclocking
Cable Management Pictures
I've built around 10 computers so I'm by no means an expert. In my prior builds, I didn't really care about how it looked inside because (1) I don't over-clock so I didn't care too much about air-flow; (2) I don't like the plastic window in cases so I don't get them, therefore, nobody sees what my...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:54.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App