Bad Sectors on Hard Drive, Can no longer boot Windows 7

Here's a photo of the screen.

I'll have to look around because I'll have to verify Seatools uses BCDW.

In the meantime, you ought to go into your BIOS and see if you can test your memory.

You might also go into the BIOS, make note of any settings you may have changed, and clear to default.

Do the memory test first to see what it reports. Do you have any reason to believe this second CD/DVD burn didn't go right? You might try downloading a fresh copy of Seatools.

I'll try the memory test. I believe the only setting I've changed in the BIOS is making the Dvd drive boot position first but I'll reset anyway. Funk7997

I reset my BIOS but couldn't find an option to do a memory test. Just a thought, if I booted into windows on a different drive, could I use SeaTools for Windows on the bad drive that way? Funk7997

That may work. You'll have a better chance if you have the drive connected via the normal connection so that the app can access the drive the way it needs to in order to get the data necessary for a full diagnostics result. In other words, connected via SATA or IDE port (whichever applies) rather than a USB adapter. If you connect via USB it may not be able to read the SMART data on the drive...

Haven't had a chance to check out that BCDW issue yet, I've been kind of busy.

I don't have any (Windows) desktops and I don't know if its possible to connect more than one SATA device to a laptop. USB is all I have access to. Would it still be safe to try? Funk7997

funk7997 said:

I don't have any (Windows) desktops and I don't know if its possible to connect more than one SATA device to a laptop. USB is all I have access to. Would it still be safe to try? Funk7997

Yes, safe to try. And better than nothing...

It didn't work. I think I should clone the drive onto a new larger drive since I want to upgrade my storage anyway. Any other suggestions are welcome, but I'm pretty sure this is what I'm gonna do. -funk7997