Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: NVRAM Error

28 Jun 2012   #1
ik8ozv

Windows 7 Ultimate x64
 
 
NVRAM Error

Hello,
i have the old Pc that has as Mainboard a P5B Deluxe.
I have noticed that everytimes i reset the PC I get the folllowing error:

NO Keyboard Detected!
Press F1 to Resume
Checking NVRAM..
This appears just for a second and then i see the O.S. Loading.
The Keyboard is attached to the PC and it works because After have
loaded the O.S. I can use it with no problems.
I have tried a Cmos clear but still get the error.
What could it be?
What to check?
Any help will be really appreciated.
Thanks.
Enzo


My System SpecsSystem Spec
.
28 Jun 2012   #2
essenbe
Microsoft MVP

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

NVRAM is non volitaile memory. It is the memory that usually retains your settings. There are several things that can cause this error but the most likely one is a bad CMOS battery or even ram errors. The CMOS battery is the easiest to replace and is very cheap. It is also called a coin battery because it looks like a coin on your motherboard. If you change the battery you will lose all settings in BIOS, so remember what they are. A good sign is if the system is losing the date and time.
My System SpecsSystem Spec
01 Jul 2012   #3
ik8ozv

Windows 7 Ultimate x64
 
 

Have changed the CMOS Battery, but get alway the erro whe resetting the PC.
My System SpecsSystem Spec
.

01 Jul 2012   #4
essenbe
Microsoft MVP

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Are you getting blue screens or just error messages? What else is not going right with the computer? NVram is usually, to the best of my knowledge, ram that holds the bios settings. After replacing the battery did you go to bios and set optimized defaults? But, if it is not the CMOS battery, I would run memtest86 and see if it could be the system ram. If that does not show errors, maybe we can get someone with a little more experience than me with these issues.
My System SpecsSystem Spec
01 Jul 2012   #5
writhziden

Windows 7 Home Premium 64 Bit
 
 

How long have you noticed this error occurring?

Does it also happen if you completely turn off the system and then turn it on, or is it only when you restart or reset the system?

Can you be more specific as to what you mean when you say "reset the PC"? There are a number of different methods for resetting a PC, and even some different meanings behind the phrase.
My System SpecsSystem Spec
01 Jul 2012   #6
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

ik8ozv,

The sources of such problems are legion.

You need to help us to slowly, but surely, eliminate possibilities.

would you please:
1. provide the requested info which will be a big help,
2. any and all snapshots reflecting upon the problem would be helpful,
3. running of Memtest86+ is rather much a necessity,
4. your updated system specs sure do help us to sniff out the problem.

Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec
(left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
Manufacturer and Model and
ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the “Other Info” block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

You will find that in Speccy, you can select info from the display
using your mouse/touchpad and then paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.

=================================================

Here is how to make and how to post a snippet.
Post a File or Screenshot in Seven Forums

How to use the Snipping tool:
Make a snapshot:
WIN |
type SNIPPING | ENTER | New
Drag the cursor around the area you want to snip.
File | Save as | select save location and name | Save

My System SpecsSystem Spec
01 Jul 2012   #7
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Hi ik8ozv, Welcome to Seven Forums.
To help all of us would you please add your systems specs? Here's how: System Info - See Your System Specs
another way.

If you are using the Reset button on the case, don't do that, it can corrupt files. Click the (Start button) then Restart instead.
My System SpecsSystem Spec
02 Jul 2012   #8
ik8ozv

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Hi ik8ozv, Welcome to Seven Forums.
To help all of us would you please add your systems specs? Here's how: System Info - See Your System Specs
another way.

If you are using the Reset button on the case, don't do that, it can corrupt files. Click the (Start button) then Restart instead.
Guys,
actually i am using and old PC because the one i used before ( new ) had a problem
with a Downgrade Bios and now i have bring it bak to the dealer for change it
hoping under warranty.

Now i would like to know if i have to update my info specs with the PC that i am waiting the Motherboard coming back or with this old one that i am using in the meantime i get the new one back?
Thanks for help.
Enzo.
My System SpecsSystem Spec
02 Jul 2012   #9
essenbe
Microsoft MVP

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

It would help to have the specs on the one you are asking about in this thread, so we know what hardware we are talking about. When this gets resolved and you get your new computer back, just change the specs to that computer. It's easy to do, I change mine every couple of months. You can look at my specs to see what we are looking for. Just My click system specs in the bottom left of my post. In the same place in your post, there will be an option to update your system specs.
My System SpecsSystem Spec
02 Jul 2012   #10
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

ik8ozvUpdate your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec
(left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
Manufacturer and Model and
ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the “Other Info” block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

You will find that in Speccy, you can select info from the display
using your mouse/touchpad and then paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.
My System SpecsSystem Spec
Reply

 NVRAM Error




Thread Tools




Similar help and support threads
Thread Forum
Burnt out from error error error! Time to go back to Paper.
Hello there. I have been redirected here by jamanji, whom has been most helpful by the way. My PC crashed a little over a week ago. Rather than retype everything, I would like to give you the link to my post. I am not 'Tech' per se, but I would like to try and resolve my problem myself, To...
System Security
Error 41, Error 1001 and error 6008.
Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots. I've updated all my drivers. Tested my memory. Tested my RAM. Run a...
BSOD Help and Support
Error copying file: Data error (cyclic redundancy check). CRC Scan ?
Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks HDDStatus - Tool to check hard disk status, health and reliability Hey, I've been using GoodSync for the...
Backup and Restore
BSOD by ntoskrnl.exe, error d1, error 3b, error 1a
I've just install windows 7 home premium 64bit and got 4 times of BSOD. for the first time error code is 0x0000001a for the 2nd time error code is 0x0000003b for the 3rd time error code is 0x0000003b for the 4th time error code is 0x000000d1 I also attach minidump files and text files that...
BSOD Help and Support
Scan Error Error while Scan::0::LEAD Error: Twain source manager no
hi.... i have promblme , i do not know how to fix it.. i have kodak scnners i1220 plus i have RD Web Access the promblme is.. I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message (Scan Error Error while...
Hardware & Devices
BSOD error.. Restarts, but power button stays on, graphics card error?
Hey guys, i want to thank you ahead of time for helping me. This BSOD is a pain in the butt. Intel Pentium 2.8GHZ RAM 3.5 32 bit OS Intel GG965 Express Chipset Family I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App