Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SATA Mode IDE or AHCI when you have a SSD drive?

07 Feb 2015   #21
nathal

Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
 
 

What if Win7 was installed in RAID mode first? I can keep that the same, right?


My System SpecsSystem Spec
.
Reply

 SATA Mode IDE or AHCI when you have a SSD drive?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Switching SATA Mode from RAID to AHCI
While dealing with another issue, I've been told that I should switch my SATA mode from RAID to AHCI. I do not have a RAID array and don't plan to. However, I've been told that I would need drivers for this, and I'm not sure if my Windows installation has them or not. I don't want to switch modes...
Hardware & Devices
can't boot from cd/dvd sata drive/AHCI mode
Is it just plain not possible to boot from a CD/DVD drive that is set in BIOS as SATA/AHCI mode? I can acces the drive & read/write from it, it just won't boot to it. Yes I have CD/DVD drive set as 1st boot drive. I have "Googled" the earth & can't seem to find a straight answer to this. Can anyone...
Hardware & Devices
Sata Mode AHCI / IDE
Hey everyone. I hope everyone is doing fine. I've literally rebuilt my entire machine but I think I made a mistake before installing Windows 7. I should have gone over the BIOS with a fine tooth comb, but I did not. The SATA mode is set to IDE instead of AHCI or RAID and now of course, I can't...
Hardware & Devices
after change to SATA AHCI mode in BIOS the drive shows removable
So after I changed to SATA AHCI mode in the BIOS, the main boot internal hard drive shows as a removable device in system tray. So how do I fix this issue, and I did follow the instructions in the Microsoft Knowledge Base article 922976, http://support.microsoft.com/kb/922976 to enable the...
Drivers
Changing SATA from Compatibility mode to AHCI
Hi, back with another issue on a different computer. I'm installing Seven on a WinXP machine and completed the install, but forgot to change the SATA setting in the bios from "compatibility mode" to AHCI. Now when I change it, windows gives me bluescreen on boot. I'm dumbfounded that Windows...
Installation & Setup
SATA that support AHCI and RAID mode only
I have an Asus M4N78 PRO. There are 6 Sata connectors but 2 support AHCI and RAID mode only. (4 red and 2 black) I have 3 harddrives and 1 DVD connected in the 4 red ports. Maybe I'm going to buy a SSD to speed up my PC :) Is it possible to use one of the black sata ports if I enable AHCI....
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App