New
#1
CPU Cooler: Screws cannot reach
Hello guys.
I've recently ordered the Zalman FS-C77 Fatal1ty CPU Cooler for my motherboard (check specs, I do not remember the name ). It's supported with the 1156, I have the i5 2400k, I've heard CPU Coolers with the 1156 support, also fits in the 1155. In the box, follows a little extra box for the Clip Supporter for socket 1156/775. It showed how I could install the Clip for my type of socket. No problems there.
It did only show how I install the clip, not how I install the "rest", as in the CPU Cooler. So I just thought, as this little extra tutorial would work for 1156/755, I'd just continue on the actual manual where it explains how to install for 775. Why? Because the extra tutorial show for 1156 (mine), and for 775 (is also on the main manual). Can you follow?
So I continued on the main manual, and it said I should put the S-grips on the Cooler. Cool, no problem. I should also put "bolts", which are screws, down in the grips. So we're having two grips, and two screws in the grip holes - on the cooler. I said I should screw the screws (bolts) in the Clip Support, as I installed earlier.
The problem is that the Bolts could not reach the Clip Support. I attached some pictures of the manuals.
https://www.dropbox.com/sh/lmkruywcmkax3ej/nkW180pfel