Anyway to check Motherboard for errors?


  1. ykisana
    Posts : 41
    Windows 7 Home Premium 64bit
       New #1

    Anyway to check Motherboard for errors?


    Does anyone know of anyway I can check if my motherboard is has errors or is defective?
      My Computer
    Quote Quote

  3. DeaconFrost
    Posts : 5,795
    Windows 7 Ultimate x64 SP1
       New #2

    There aren't usually diag software apps for a motherboard. What's the problem you are having, and we can go from there.
      My Computer
    Quote Quote

  4. ykisana
    Posts : 41
    Windows 7 Home Premium 64bit
    Thread Starter
       New #3

    The problem I'm having: My Computer Freezes Consistently
      My Computer
    Quote Quote

  6. DeaconFrost
    Posts : 5,795
    Windows 7 Ultimate x64 SP1
       New #4

    After the BIOS update, has the system been stable?
      My Computer
    Quote Quote

  7. ykisana
    Posts : 41
    Windows 7 Home Premium 64bit
    Thread Starter
       New #5

    So far...
      My Computer
    Quote Quote

 

  Related Discussions
My old Auslogics Disk Defrag had an option to check C: (system) drive for errors without having to run a boot chkdsk before defrag (the Only thing I liked about Aus!)- It would come back and say Windows reports No errors... I've uninstalled Aus, gone back to Much Better/faster WDD (One pass...
I have windows 7 enterprise x64 installed on my machine. I've been having troubles for a while. Many updates don't install, and device drivers won't install when a new device is plugged in (extremely annoying). I thought that I could do an in-place upgrade install and possibly fix the problem, but...
How to check what my pc motherboard type is AGP? PCi? PCie Computer Specs Acer Aspire M1935 System Operation FreeDos Processor Intel Pentium Processor G645 Already Used CPU-Z The Graphic Interface Doesnt Show A Thing
I believe the Intel DG965RY motherboard is the problem as the PSU fan kicks for a second then shuts down. Nothing else seems to be working. I disconnected the 24 pin connector from the motherboard, shorted the off/on to turn the PSU on, then checked voltage on the Antec PSU. The fan now works &...
I'm getting a lot of "Check Disk for Errors" and "this hard drive needs to be formatted before it can be used" error messages when plugging my external usb hard drives into my home pc which uses windows 7. I don't get any of these messages when I plug the same hard drives in at any of a number of...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 16:04.
Find Us