Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Usb-serial code 28 !

20 Jul 2012   #1
gsxbozzy

derbyshire
 
 
Usb-serial code 28 !

Hi there, ive purchased a usb - serial device for flashing my cars ecu.
It is discovered fine on my pc ( Win 7 32 bit )
but my samsung rv520 new laptop ( win7 64Bit) it just comes up with an unknown device code 28 in the device manager.
it is suitable for 32 bit and 64 bit so its not that, ive uninstalled usb drivers , hubs etc but it still wont install it.
ive tried manually showing it where the driver is even tho my pc didnt need even that i just plugged it in and 2 secs later it was working.

so please help because im so frustrated with it.

steve


My System SpecsSystem Spec
.

20 Jul 2012   #2
fireberd

Windows 7/8.1/10 64 bit
 
 

Code 28 is driver not installed.

Plug the USB device into the PC. Go to the Device Manager and RIGHT click on the entry for the unknown device to highlight it and then LEFT click "Uninstall". Remove the USB device from the PC and then restart the PC. After Windows loads, plug the USB device in and Windows should detect new hardware and install it. Then, when you want to unplug it, Always use the "Safely Remove Hardware" to "stop" the device before you unplug it (on Both PC's, not just the 64 bit one).
My System SpecsSystem Spec
25 Jul 2012   #3
gsxbozzy

derbyshire
 
 

Hi, thanks but ive tried that and still no joy, its loads windows and instantly tries to load driver but fails straight away saying driver couldnt be loaded. Im tearing my hair out with this.
Ive tried on my laptop and my mums laptop win xp... but still wont work with either but if i plug it into my pc.. hey presto its fine.
My System SpecsSystem Spec
.


Reply

 Usb-serial code 28 !




Thread Tools





Similar help and support threads
Thread Forum
Universal Serial Bus controllers error Code 39
Hi. Please help me. So I was just using my laptop, and that day the USB port won't detect anything, except the laptop's fan. I tried any way I could Google, but I cannot still fix it. When I went to the Device Manager, This is what I found : http://puu.sh/88i3p.png What do I do? I do not...
Hardware & Devices
USB to serial (win 7 64 bit)
Hello, i recently bought a new laptop and also installed windows 7 64 bit. I also bought an adapter USB to serial (RS232 - HL340) but windows doesn't install the drivers that came with it (it says: installation failed!). It worked just fine at my friends computer, who has windows 7 32 bit. So...
Drivers
How do I deactivate a Windows 7 Serial code?
How do I deactivate my serial code whenever I want to format my PC, so that it resets the limit of how many times I can enter it? thanks
Windows Updates & Activation
universal serial bus controller code 28
Hi, I have a vertex 3 240gb ssd and asrock z68 extreme4 motherboard (I plugged the ssd into one of the sata slots which I believe are the same). For universal serial bus (USB) controller it tells me: the driver is not installed (code 28) How can I correct this? thanks
Drivers
Code 37 on All Universal Serial Bus ports.
Hi! I did a little searching to no avail. This is my issue. I have an HP Pavilion DV7 Laptop which came with Windows Vista Home Premium x64. Just recently had a HDD failure which was a Toshiba 320GB. I now run a 500GB Toshiba HDD and upgraded to Windows 7 Home Premium. My keyboard...
Hardware & Devices
Can I use my RTM serial on RC1?
I bought windows 7 ultimate 64bit and my COD5 keeps crashing and then I have to restart cause everything is corrupted. Everything elase seems ok but I play COD every day. I restored my RC1 image and all is back to normal but it will run out. can i enter the RTM key and keep 7100 cause it dont...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:01.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App