Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Acpi & slic bios

14 Aug 2012   #1
Tokyo

Enterprise 32bit
 
 
Acpi & slic bios

I've tried to understand about ACPI & SLIC BIOS system but................So can you tell me how different between these system?


My System SpecsSystem Spec
.

14 Aug 2012   #2
logicearth

Windows 8.1 Pro (x64)
 
 

The difference between the two is like comparing an apple to a rock. They are completely different.
My System SpecsSystem Spec
14 Aug 2012   #3
alphanumeric
Microsoft MVP

Windows 8.1 Pro with Media Center 64 bit
 
 

One has nothing to do with the other. I would think that just about any motherboard you could buy would be ACPI. The SLIC table would only be there if it was a name brand PC or Laptop sold with a Preinstalled OS. The SLIC table is basically a vendor ID that is tied to the install media for OEM-SLP Activation.
My System SpecsSystem Spec
.


Reply

 Acpi & slic bios




Thread Tools





Similar help and support threads
Thread Forum
BIOS NOT ACPI COMPLIANT error 0x000000A5
I purchased a new ASUS laptop with Win8. I wanted to replace it with Win7. I wiped, formatted and partitioned the HD. I changed the BIOS so it boots from the DVD. I put my 7 disc in and started. A message says it is loading files. In a minute or so I get the Blue Death Screen with the...
Installation & Setup
Win 8.1 to 7 downgrade bios not fully acpi compliant
I am trying to downgrade a dell inspiron 3531 from 8.1 to 7 by using a memory stick but when booting from from the usb stick it loads files and just comes up with bios not fully acpi compliant error. Have been told to install with a dvd but havn't tried this yet. Read a few threads about this error...
Hardware & Devices
BIOS valid for OA 2.0: no, invalid SLIC table using kms key
hi i am activating windows 7 enterprise on particular system . the kms key is ok and other systms are activated using that key. but this particular system cannot be activated. using wga tool i get this error BIOS valid for OA 2.0: no, invalid SLIC table is there any setting in bios that i...
Windows Updates & Activation
bios not fully acpi compliant stop error
Before I get into the details of the issue I want to point out that this computer was running Windows 7 fine without any bsod or other errors for about 6 months. 6 months ago I performed a wipe/ restore of my system drive to clean out the crud that windows/programs build up over time. windows 7 had...
BSOD Help and Support
BIOS ACPI not complaint, this errror come, Solution please !
hey , i tried to install windows 7 ultimate , windows 7 professional on my laptop , but always after installation this error comes up: " A problem has been detected and Windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error...
Installation & Setup
This bios is not Acpi compliant
For about 5 weeks my pc would not boot up properly and i eventually discovered that one of my ram chips was faulty so i replaced it and now works only upto 3 gig with windows 64 bit but when i install the 4th chip i get a Bsod with the message this bios is not Acpi compliant so i went to the...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App