Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Seatools DST issue

30 Aug 2012   #1
gsbharaj

windows 7 home premium x64
 
 
Seatools DST issue

hey folks whats up?
out of curiosity i checked my HDD for errors. so, i downloaded seatools for windows. ran it and it showed the DST failed. the bar never came. it just failed. the rest ran fine.
then i downloaded the seatools for dos. ran it all the test and all went fine. DST passed. now what is the problem? DST for windows fails but for dos passes.


My System SpecsSystem Spec
.
31 Aug 2012   #2
jumanji

Windows 7 Home Premium 32 bit
 
 

That is the difference between Real Mode DOS and Virtual Mode Windows. ( You know why I am smiling. )

DOS commands work directly compared to operating through Windows Hardware abstraction layer and therefore more reliable.

There is absolutely no point in researching why Windows Short DST failed. If DOS tells you that everything is OK, that is it.
My System SpecsSystem Spec
Reply

 Seatools DST issue




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
SeaTools for DOS and Windows - How to Use
How to Use SeaTools for DOS and Windows Disk Check Utility Part One: SeaTools for Windows Part Two: SeaTools for DOS *Caution for AHCI Storage Controller Seatools is a powerful tool to analyze the Hard Drives. It can perform a lot of tests like Drive Self-test, Read-Write teat, SMART...
Tutorials
Seatools thinks empty USB is a HDD (+ BSOD issue)
PC is 5 years old & I'd like to keep it running smooth if possible. I've never been able to get RESTORE to help with any problems. I changed out my graphics card 2 or 3 months ago because I suspected it might be causing issues ... I thought the PC died last last month when boot times were...
Hardware & Devices
Repeated BSOD on Seatools scan
Hi I have been getting the attached BSOD almost daily recently. I tried to run a scan with Seatools (Long Generic) but I get the BSOD each time i try. I'm guessing its a hard drive fault. Any help would be greatly appreciated t Here is a copy of Hard Drive Information from Seatools. Stuart
BSOD Help and Support
Problems after running SeaTools
Hi all :) This started after I ran SeaTools for Windows, Long generic test..which passed but I'm having few issues ever since: I usually turn off my computer before going to bed, but the morning after I took the test when I powered up my computer it started with this hearable vibration. I...
Hardware & Devices
Problems checking HDD with SeaTools
Two parts to this question: (1) I installed a new 1TB Seagate Baraccuda 7200.12 Installation seems fine. SeaTools (ver 1.2.0.2 and ver 1.2.04) won't detect the internal drive but detects external usb drives ok. Can you suggest why? (2) My two Seagate 500GB, 1TB externals record disk temps...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App