Warning's in Dev Man and Devices and Printers

Page 1 of 2 12 LastLast

  1. Posts : 419
    Windows 7 Ultimate SP1 64- bit
       #1

    Warning's in Dev Man and Devices and Printers


    I recently installed an SSD, I changed everything to ACHI in the bios, I'm now getting warnings in the following places.
    Is anything wrong?
    Attached Thumbnails Attached Thumbnails Warning's in Dev Man and Devices and Printers-marv.jpg   Warning's in Dev Man and Devices and Printers-dev.jpg  
      My Computer

  2.    #2

    Do the yellow warnings have any code numbers or error codes associated with them?

    Go to device manager:

    Right-Click device with yellow triangle > Properties > Device status area

    You should find a error code within the device status area, which will help people on the forums, fix any associated problems.

    Hope this helps,

    Harry
      My Computer


  3. Posts : 419
    Windows 7 Ultimate SP1 64- bit
    Thread Starter
       #3

    x BlueRobot said:
    Do the yellow warnings have any code numbers or error codes associated with them?

    Go to device manager:

    Right-Click device with yellow triangle > Properties > Device status area

    You should find a error code within the device status area, which will help people on the forums, fix any associated problems.

    Hope this helps,

    Harry
    Okay, here's a couple of screenshots.
    Attached Thumbnails Attached Thumbnails Warning's in Dev Man and Devices and Printers-marvel.jpg   Warning's in Dev Man and Devices and Printers-madriver.jpg  
      My Computer

  4.    #4

    Okay, as you can see, you will need to visit the manufacturer's website and download the drivers for that device, which in turn will allow Windows to recognise the device properly and allow you do use it.

    This tutorial should help you: Driver Install - Device Manager

    I believe this is your manufacturer's website: http://www.drivermanager.com/en/driv...FUdvfAodzVsA4Q

    Hope this helps,

    Harry
      My Computer


  5. Posts : 419
    Windows 7 Ultimate SP1 64- bit
    Thread Starter
       #5

    x BlueRobot said:
    Okay, as you can see, you will need to visit the manufacturer's website and download the drivers for that device, which in turn will allow Windows to recognise the device properly and allow you do use it.

    This tutorial should help you: Driver Install - Device Manager

    Hope this helps,

    Harry
    I'm not using anything with Marvel, it's ACHI.
    I forgot to add that is the same code for my USB fault/warning.
      My Computer

  6.    #6

    Free Download Marvell 91xx AHCI RAID Controller Drivers

    The problem is with the driver controller, and what did you change, to make the USB drivers missing? O.o
      My Computer

  7.    #7

    Try this tutorial for the missing USB drivers: USB Driver - General Fix for Problems

    Hope this helps,

    Harry
      My Computer


  8. Posts : 419
    Windows 7 Ultimate SP1 64- bit
    Thread Starter
       #8

    x BlueRobot said:
    Try this tutorial for the missing USB drivers: USB Driver - General Fix for Problems

    Hope this helps,

    Harry
    Still no joy.
    If you see the screenshot in my first post, that USB warning is in "other devices".
      My Computer


  9. Posts : 419
    Windows 7 Ultimate SP1 64- bit
    Thread Starter
       #9

    nimeidaye said:
    Down sized



    Pardon!!
      My Computer

  10.    #10

    Is your SDD called OCZ Vertex 4? What is the manufacturer?
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:24.
Find Us