New
#1
correct configuration for SATA+ IDE HD + IDE DVD writer
Hello,
I need you help to configure my system.
I want to use my 500 GB SATA WD HDD as Master(Win 7 installed) and 80 GB Samsung IDE HDD as Slave (windows xp installed) and LG IDE DVD writer.
For that I tried following different settings but none of them work.
1) SATA with no jumper + IDE disk with master jumper and IDE DVD writer as slave jumper
2) SATA with no jumper + IDE disk with Cable select jumper and DVD writer as cable select jumper
But in both the situations IDE disk and DVD writer did not detected in BIOS and pc boot with windows 7 SATA.
If I use any two then this combination does work
a) SATA with no jumper + IDE disk with no jumper = Work
b) SATA with no jumper + DVD Writer = Work
c) IDE disk with master jumper + DVD writer without jumper = work.
But I want to use all three hardwares together.
Information :
My motherboard (ASRock -Wolfdale1333-D667) does have only one IDE port.
I am using 80 pin IDE cable (newly bought )
Please help me to configure correctly.
Thanks in advance.