Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: CPU issue possbile could be psu

26 Sep 2012   #1

windows 7 home premium
 
 
CPU issue possbile could be psu

Hello i recently installed my corsair 850 W psu but after doing so it took me around 3 hours to get my pc to even boot and the cause from what i could find is i change the 3 pin power connection for my corsair h60 it then decided to boot up but made an insanely loud noise that was coming from the block that i assume to be the pump i then changed the 3 pin location it was connected too but to no avail when i turned my pc on it booted fine but within 1 minuet it was as loud as can be so i opened up core temp and it was reading 67-8 degrees bear in mind this is up from my usual 18 degrees so i changed the 3pin to a molex and to no avail it is still loud and my temps are high i can only assume that my pump in my block has failed
Who should i contact and what do you think the issue is?
(Side note my mobo has a 8 pin connection how ever i was only using 4 pins now im using 8 this could be a factor but i have no idea)
Cheers - silver

My System SpecsSystem Spec
.

26 Sep 2012   #2

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate SP1 X64 (Windows 8.1, Linux Mint, Windows XP in VM)
 
 

Silverstormz, Maybe I am misunderstanding you. If I am not mistaken, the Corsair pump is powered by a 4 pin molex connector from the PSU, it has a 3 pin connector to plug into the CPU fan header on the motherboard. The 3 pin fan connector is to keep your motherboard from not detecting a CPU fan and also to monitor the pump speed. Make sure the 4 pin power connector is plugged in to the PSU and that the fans on the radiator is running. If I misunderstand you, please advise. The pump has to run 100% all the time. Also, if your board has and 8 pin ATX connector, use the 8, not just 4.
My System SpecsSystem Spec
27 Sep 2012   #3

windows 7 home premium
 
 

I had changed it to molex but the pump didn't work the one in this video i made is the only one it works in but it makes this noise
VIDEO0004 - YouTube
My System SpecsSystem Spec
.


27 Sep 2012   #4

Windows 8.1 Pro RTM x64
 
 

The video is Private, so cannot be viewed.
My System SpecsSystem Spec
29 Sep 2012   #5

Windows 7 Pro. 64/SP-1
 
 

Take a look see here. By Corsair.
Hydro Series
Click on video/ upper right.
My System SpecsSystem Spec
Reply

 CPU issue possbile could be psu





Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:15 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33