Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: computer wouldn't wake (CPU was replaced error)

15 Dec 2012   #11
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Quote   Quote: Originally Posted by HAVOC View Post
Ok. I could start that tomorrow.
Why though is it giving me a "CPU was replaced error"? I recently put the computer back together (everything was disassembled). I also recently reseated all the memory (windows wasn't showing the total 12GB).

I hope this isn't related to a CPU/motherboard error.
Well maybe this is happening because of the disassembly H it is the only reason I can think apart from as you say a mobo / CPU problem.

But the fact that it is giving this error doesn't affect the boot is good.

In the BIOS the CPU is listed I suppose an obvious statement but if it is then the CPU message should only be displayed once. All the power leads nice and snug?
Personally I think the CPU is fine and it is the mobo that may be having problems. Now that might show up when you run the RAM tests any problems there would certainly point the finger away from the CPU.

Don't suppose you have an old machine you could try the RAM in?

Look I am sorry this is dragging out a bit and it has to be something hardware based. Your BIOS is it the UEFI or not?


My System SpecsSystem Spec
.
15 Dec 2012   #12
tb293009

Windows 7 Ultimate x64
 
 

it might be a motherboard error

usually if a system works when restarted a lot

it is not a cpu error

my best guest is motherboard

or graphics cards
My System SpecsSystem Spec
15 Dec 2012   #13
HAVOC

Windows 7 Professional 64bit
 
 

I don't have any other RAM except what's in the system now. If I remember correctly, I had this problem before I took the computer apart (to transfer it to a new case). I think that was solved by changing sleep to S3 in the BIOS. Don't remember if I had this CPU error or not.
I don't think I have UEFI.
Would a bent pin on the CPU socket cause this? When the MB was new, one of the pins looked a little off, I did not touch it.
My System SpecsSystem Spec
.

15 Dec 2012   #14
tb293009

Windows 7 Ultimate x64
 
 

from my experience a bent cpu pin would result in the processor not fitting in the socket.
i think it is motherboard
My System SpecsSystem Spec
15 Dec 2012   #15
HAVOC

Windows 7 Professional 64bit
 
 

Quote   Quote: Originally Posted by tb293009 View Post
from my experience a bent cpu pin would result in the processor not fitting in the socket.
i think it is motherboard
This motherboard has the pins as part of the socket. The CPU doesn't have pins.
My System SpecsSystem Spec
15 Dec 2012   #16
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Yes H tb is right it would not fit in the socket or at very least short out against the others.

So you have the old type BIOS then as the UEFI is quite different because the "front" panel / GUI looks like in the pic.

Now as tb has said it looks increasingly like a mobo issue can you have a scout around for any signs of scorching bulging caps anything that could be loose etc

No mate you have the previous version of the BIOS
http://www.evga.com/support/manuals/...31-GT-E767.pdf


Attached Images
computer wouldn't wake (CPU was replaced error)-uf.png 
My System SpecsSystem Spec
15 Dec 2012   #17
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Doesn't make any difference where the pins are H - same problem probably a bit easier to force the CPU in that way than pins on the CPU.

You will need a really good magnifying glass to see them one way way of checking is to get a credit card or similar piece of very straight sided plastic and gently try the alignment of the pins with the straight edge. They should all touch in unison in both axes (plural of axis)
My System SpecsSystem Spec
15 Dec 2012   #18
tb293009

Windows 7 Ultimate x64
 
 

there are pins in the processor

but what do i know

i have only worked with a 2005 hp desktop

*sarcasm*
My System SpecsSystem Spec
15 Dec 2012   #19
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Quote   Quote: Originally Posted by tb293009 View Post
there are pins in the processor

but what do i know

i have only worked with a 2005 hp desktop

*sarcasm*
Hum tb just where are these pins located mate as I was under the impression that it was a 1366 pin LGA socket.?

But I stand to be corrected as I have never actually seen a 1366 CPU
My System SpecsSystem Spec
16 Dec 2012   #20
HAVOC

Windows 7 Professional 64bit
 
 

CPU:
http://images.bit-tech.net/content_i...1366cpu-sm.jpg

MB:
http://www.cpu-world.com/Sockets/L_LGA1366-side.jpg

You can see how tiny the pins are on the MB. (MB might not be the actual one I use)
My System SpecsSystem Spec
Reply

 computer wouldn't wake (CPU was replaced error)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD 0x116 (stop error) Replaced GPU, replaced RAM, replaced PSU
My monitor goes black and I am forced to reboot. After rebooting I get a blue screen prompt telling me that i've recovered from a BSOD. I've been monitoring them since October. In October, I RMA'd my graphics card. Oct 27. You can see that after I got a new GPU, my BSOD's halted... so...
BSOD Help and Support
BSOD unknown error - Have replaced almost everything.
I have win 7 professional. Have been running MS Access on this machine for over a year. Things were going fine. Then about 2 weeks ago my access program started giving issues and progressively got worse; resulting in system shut down. uninstalled & reinstalled with no effect. Since then, my machine...
BSOD Help and Support
Couldn't boot up PC, replaced HD and now get 0x000000124 error
My PC recently would not boot up. Even in repair it would freeze, reinstalling windows did not help and eventually anything I loaded whether repair, setup of windows or straight boot into the OS would result in a BSOD error. I replaced HD and was able to boot in finally and reinstall windows. ...
General Discussion
Mirrored drive: HD failure error..Replaced with SSD?
My existing dual boot winxp/win7 mirrored configuration appears to have issues. I ordered a SSD hd today from newegg. Question: new install, or just re-image the SSD? IF i do new install, do i have to have a authorization from Microsoft? I purchased this Windows 7 Professional 2 years...
Installation & Setup
Computer won't load windows even though I replaced HDD, RAM,CPU, MB
I recently updated my PC and just bougth some different gear, for some reason it just refuses to boot. What happens is when I get to the windows logo loading screen my pc just freezes and reboots. This kept happening so I bought a new HDD and still the same, checked the harddisk to be sure on...
Hardware & Devices
Misc BSOD, replaced every part in my computer - Need some assistance!
This is my first time posting here although I am a frequent "lurker". This forum has tons and tons of valuable information and it really helps me a lot without actually having to post or ask questions. Now to the real reason I am posting. I have receiving frequent BSOD's. It will go 2-3 days...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:11.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App