USB SATA is not recognized after BIOS update


  1. oRmA
    Posts : 12
    Windows 7 Professional 32-bit
       New #1

    USB SATA is not recognized after BIOS update


    the title says it all
    it was working before the BIOS Update My Board is Intel DG31PR
    Updated to the (http://downloadcenter.intel.com/Deta...=2839&lang=eng)
    and i dont remember the old BIOS version
    Help?
      My Computer
    Quote Quote

  3. DeaconFrost
    Posts : 5,795
    Windows 7 Ultimate x64 SP1
       New #2

    You can check in your BIOS settings to make sure the USB ports are still enabled. THen, make sure they show up in Windows, and try other devices, such as a flash drive.
      My Computer
    Quote Quote

  4. oRmA
    Posts : 12
    Windows 7 Professional 32-bit
    Thread Starter
       New #3

    i checked it and it was ON
    the USB SATA drive can come for 2 seconds and then goes away
      My Computer
    Quote Quote

 

  Related Discussions
I had a pc with SATA-1 drive installed windows7 64 bit, it was working fine untill I decided to attache the another hard drive SATA-3 with server 2003 loaded on it. I wanted to copy some data from SATA-3 and then wipe it off and use as additional storage, But the PC stop booting from windows7...
Hi, First off I am running Win 7 on a primary SSD, and have 2 1TB HDD in RAID 1 for storage. I have been running this setup fine for a while now. I recently updated my BIOS (P8P67) using the EZ Flash utility from USB per the following steps: -Restore defaults -Flash new BIOS -Restore defaults...
Hi, I installed an old 160GB Seagate Barracuda into my Win7Pro64 machine for some extra storage room. At first it worked fine. I cleaned it out and did a quick format in Windows. Now Windows does recognize it at all. I see it in the BIOS but it won't show up in Windows. Any ideas? ...
Hello I recently changed my media playing computer from an old Pentium 4 ruining XP, to a modern slim HP computer with Win 7. Because much all of my data was stored on one SATA hard drive, I removed it and placed it in my new machine. after a short time messing about I was able to "import" the...
Hey folks. Installed a new WD Caviar Black 750GB drive for backup purposes today. BIOS recognizes it. W7 recognized it and installed the drivers. The drive, however, doesn't appear under My Computer. I reinstalled the drive, this time with a different SATA cable into a different SATA port...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 20:34.
Find Us