Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: P5QL-E voltages???

01 Oct 2009   #1
EpicThorn

Windows 7 Ultimate 64 Bit
 
 
P5QL-E voltages???

Does anybody know anywhere (website or program) that will tell me the standard voltages of my hardware? Any help would be appreciated.
My mobo P5QL-E <green>

Cheers in advance.

Thorn


My System SpecsSystem Spec
.
05 Oct 2009   #2
EpicThorn

Windows 7 Ultimate 64 Bit
 
 

BUMP
Come on, surely there is a someone that knows the info, or at least knows of a program that can help me!

Thorn
My System SpecsSystem Spec
05 Oct 2009   #3
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 

cpuid CPUID However your bios will always give you the truest readings. Their are also several other monitors listed on the left side of this page.
My System SpecsSystem Spec
.

05 Oct 2009   #4
EpicThorn

Windows 7 Ultimate 64 Bit
 
 

I need the voltages of the northbridge and so on and so forth, where can I find that in CPUID?

Thorn
My System SpecsSystem Spec
05 Oct 2009   #5
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 

On the page( link I posted above) you'll see HwMonitor. and several others you can try. But like I said in you bios you can usualy find under I think it is system health or something like that it lists your voltages for the north and south bridges as well as the memory ect. Here is another Asus PC probe II Monitors fan speed, voltages and temp. http://majorgeeks.com/ASUS_PC_Probe_II_d3301.html
My System SpecsSystem Spec
06 Oct 2009   #6
skunksmash

SEVEN x64
 
 

while im not sure about your boards standard or optimum NB voltage (every board is different) i can say that i wouldn't go any higher than 1.5v with that setting.

My System SpecsSystem Spec
Reply

 P5QL-E voltages???




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Fan voltages problem
Am fixing a friends older Compaq some idea of the specs in the Speccy snip/s. Problem is the CPU is running rather hot average 35C at idle and up to 60C on scans and net searches. I have cleaned everything redone the compound with Arctic Silver and reseated all the plugs etc etc Now the...
Hardware & Devices
BSOD's with different causes. A reboot seems to help. RAM Voltages?
Hi everyone, about 3 weeks ago I got a random BSOD whilst alt-tabbing out of a game (DOTA2) something I'd done quite a few times before with no issues. I scouted around and noticed mention of bad nvidia drivers burning out cards. These were the drivers I had installed so I rolled back to...
BSOD Help and Support
Does AMD Overdrive automatically adjust voltages?
I recently received my new AMD 7950, part of the drivers package is the catalyst control center, like the nvidia control panel. There is one section in it which manages performance, it has an overdrive mode. So while in idle the card clocks itself at 300mhz, when being used intensively, e.g. by a...
PC Custom Builds and Overclocking
P5QL-CM Fresh W7x64 BSOD after COLD Wake/Start
Windows 7 SP1 x64 Pro or Enterprise (tried both) Not-yet-activated (no need, I'm trying to resolve before actually activating...) The build is hmmm a bit more than 2 years old. All errors are with FRESH installs + SP1 + Updates. ASUS P5QL Latest BIOS (was also same problem before with previous...
BSOD Help and Support
Voltages (NEVER OC'd)
I HATE messing with voltages. Because of this, I wouldn't even begin to know how. That's what makes this problem a little odd. Do the numbers under +12V , -12V and the temps make anyone else worry? It's a snap of Speed Fan that I started because I was kinda stupid. I took a can of...
Performance & Maintenance
Acceptable Voltages?
Hi there, I have just recently upgraded my graphics card from a 8800GTS to a GTX260 and was finding my old E6400 holding me back and causing a bit of a bottleneck so i've overclocked it to 2.8GHz and all seems well and stable but i am just wondering are the auto voltages acceptable and more...
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App