Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: What software to use with SSD clone and for backup too? Many Choices!!

07 Feb 2013   #161
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

When booted to SSD
In elevated command prompt:
Code:
diskpart
sel vol  c
inactive
exit
reboot. Of course without dvd
Now SSD is inactive and system reserved is active.
System boots fine.

Do you only get "DRIVER_POWER_STATE_FAILURE." on cold boot. Or also after reboot?


My System SpecsSystem Spec
.
07 Feb 2013   #162
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

BTW I don't know why bios only tries to boot from old disk only.
Also I don't understand why startup repair only looks at SSD and repairs boot menu on SSD only.
Forget that issue. Shit happens.
My System SpecsSystem Spec
07 Feb 2013   #163
LeftC

Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
When booted to SSD
In elevated command prompt:
Code:
diskpart
sel vol  c
inactive
exit
reboot. Of course without dvd
Now SSD is inactive and system reserved is active.
System boots fine.

Do you only get "DRIVER_POWER_STATE_FAILURE." on cold boot. Or also after reboot?
I get "DRIVER_POWER_STATE_FAILURE" when I shut down the computer. It hangs on shut down and after several minutes I get the blue screen message. While ago was the last time that it happened.

I did the above in elevated command prompt. See snips.

I'm going to reboot after this post and see what happens. I'll report back what happens.


Attached Thumbnails
What software to use with SSD clone and for backup too? Many Choices!!-capture-dm-2_7_13-03.jpg  
Attached Images
What software to use with SSD clone and for backup too? Many Choices!!-capture-acp-01-2_7_13.jpg 
My System SpecsSystem Spec
.

07 Feb 2013   #164
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

So you get it on shutdown only (I get "DRIVER_POWER_STATE_FAILURE" )?
Always? You did have it before...please explain....

But systen boots fine now?
My System SpecsSystem Spec
07 Feb 2013   #165
LeftC

Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
So you get it on shutdown only (I get "DRIVER_POWER_STATE_FAILURE" )?
Always? You did have it before...please explain....

But systen boots fine now?
Then only appeared a day before when I told you about a blue screen error that I couldn't see. Then you had me change the automatic restart feature.

I just restarted this computer twice and it started OK. Maybe it is OK now??

BTW, a reboot takes 45 seconds. This is a fast SSD!
My System SpecsSystem Spec
07 Feb 2013   #166
LeftC

Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
BTW I don't know why bios only tries to boot from old disk only.
Also I don't understand why startup repair only looks at SSD and repairs boot menu on SSD only.
Forget that issue. Shit happens.
It surely does!
My System SpecsSystem Spec
07 Feb 2013   #167
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

I don't know how fast your SSD is. But it only reads bootmenu from old disk now. Main startup part comes form SSD. Do some benchmarking.

I did advise you to "not automatic restart on crash". So you can see bsos and it doesn't restart automatically. I did not CAUSE the crash

https://www.google.nl/#q=DRIVER_POWER_STATE_FAILURE

Make a new thread if driver_power_failure_state_failure comes back.

You succesfully transfered to SSD. Mark thread as SOLVED. I can't help you with speed!
My System SpecsSystem Spec
07 Feb 2013   #168
LeftC

Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
I don't know how fast your SSD is. But it only reads bootmenu from old disk now. Main startup part comes form SSD. Do some benchmarking.

I did advise you to "not automatic restart on crash". So you can see bsos and it doesn't restart automatically. I did not CAUSE the crash

https://www.google.nl/#q=DRIVER_POWER_STATE_FAILURE

Make a new thread if driver_power_failure_state_failure comes back.

You succesfully transfered to SSD. Mark thread as SOLVED. I can't help you with speed!
When I just rebooted I got a black screen that said "Operating System not found" when it tried to start up. I was getting this a day or two back.

I know that you helped me to see the blue screen. Maybe I said it wrong earlier. I certainly wasn't complaining. I had googled D_P_S_F yesterday. I was wondering if you knew a way for me to view my drivers? I don't know how to do this. I read that the problem may be out of date driver(s).

I'm not complaining about the speed either. I am happy with its speed. I posted its benchmark speed in the SSD speed thread and also a few posts back.

Anyway, back to a black screen that said "Operating System not found." I had to use a Win 7 install disk to get going again. Any ideas on how to fix it?
My System SpecsSystem Spec
07 Feb 2013   #169
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

you told me it did startup with only E active and no dvd inserted. Now it doesn't boot? only black screen?
My System SpecsSystem Spec
07 Feb 2013   #170
LeftC

Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
you told me it did startup with only E active and no dvd inserted. Now it doesn't boot? only black screen?
It booted up twice just fine. The third time, I got the black screen with the message.

I checked disk management and only E was active. See snip. Any ideas for a fix?


Attached Thumbnails
What software to use with SSD clone and for backup too? Many Choices!!-capture-dm-2_7_13-04.jpg  
My System SpecsSystem Spec
Reply

 What software to use with SSD clone and for backup too? Many Choices!!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Need new Hard Drive, choices, choices...
Hi there. I recently have had hard drive failure, and I am in need of an upgrade. However, I'm not sure what I should get... I have been referred to this site: Best High-End Gaming PC | Hardware Revolution Best Mainstream Gaming PC | Hardware Revolution I think I have narrowed it down in...
Hardware & Devices
How to backup (clone) a complex partition HD ?
My general question is how to backup rather complex looking partition structure. Specifically, my question is what software to select and whether any "not-too-expensive" software will do the job (plus the restore). The computer is a new ACER aspire one (D257) with Win7 Starter that offers ...
Backup and Restore
Network backup choices.
Hello forum people! I am curious today, at how to do something. I have a couple of friends that have a laptop and a desktop and want to use the desktop as a main backup, Hulk-like thing that will hold a plethora of data. My question is this, how? I'm thinking I could use HomeGroup to...
Network & Sharing
Is It Possible To Clone a Windows 7 Backup?
I have used Fastone Drive clone to clone my Windows 7 Ultimate 32 bit installation from my Western Digital 1.5 Tbt HD to my 1.5 Tbt Seagate backup HD. Unfortunately when I tested the clone it will not boot up and I get a Windows boot manager screen written in Chinese and I have no idea what its...
Backup and Restore
Acronis TI 2010 - Clone Or Backup Image?
Today I did my monthly disk imaging , and decided to test out the restore process using the smaller hard drive I have as a spare. It worked, but because the spare drive is much smaller than my active drive, I can only only backup/restore the system partition, not the data one. Since this means...
Backup and Restore
HDD clone software
Any software recommendations for cloning a SATA-I drive on mobo with Windows 7 installed to SATA-II drive on PCI controller card? I may need to do this for someone. Is Acronis Disk Director Suite "copy partition" function able to do this upon a reboot when windows is not yet loaded? It seems...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App