Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: What software to use with SSD clone and for backup too? Many Choices!!


22 Jan 2013   #61

Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Delete the FAT16 partition as well....it's useless (used by RECOVERY partition... which is gone). Now you have only 1 partition called OS.
The FAT16 partition is deleted now. See below.

We probably will not get this completed tonight. Should I leave the computer on 24/7 now until it is completed.

I have to set my BIOS so that it boots from a DVD first.

Quote   Quote: Originally Posted by Kaktussoft View Post
Are you using SSD and Harddisk at the same time later? It isn't possible to attach both to laptop at the same time as far as I know(?)
Yes. I plan to use both the Harddisk, SSD and DVD drive. The SSD will be where the DVD drive is. The DVD drive will be connected to the eSATA port for part time use.

NewModeUS.com has some very nice kits that are relatively inexpensive and they are very well made. Take a look:
Caddys for many models: caddys for notebooks
Drive Adapters: Drive Adapters : NewmodeUS, Hard Drive Caddys for Notebooks

more reading ...



Attached Thumbnails
What software to use with SSD clone and for backup too? Many Choices!!-capture-fat16-deleted.jpg  
My System SpecsSystem Spec
.

22 Jan 2013   #62

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Did you run startup repair 3 times already? After that boot normally and post bcdedit output. After that I gonna sleep.

If all went succesfull you have only 1 partition on disk and F8 recovery to "safe mode" and "repair your computer" work. Check that! Advanced Boot Options
My System SpecsSystem Spec
22 Jan 2013   #63

Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Did you run startup repair 3 times already? After that boot normally and post bcdedit output. After that I gonna sleep.

If all went succesfull you have only 1 partition on disk and F8 recovery to "safe mode" and "repair your computer" work. Check that! Advanced Boot Options
I'll run them later. Dinner is being served now. I'll have them done for you to take a look at.

I sure hope that things went as you planned.
My System SpecsSystem Spec
.


22 Jan 2013   #64

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by LeftC View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
Did you run startup repair 3 times already? After that boot normally and post bcdedit output. After that I gonna sleep.

If all went succesfull you have only 1 partition on disk and F8 recovery to "safe mode" and "repair your computer" work. Check that! Advanced Boot Options
I'll run them later. Dinner is being served now. I'll have them done for you to take a look at.

I sure hope that things went as you planned.
Post results later please. If all went fine.... buy the stuff and attach to to system. Tell me when done. Then we continue to move OS to SSD.
My System SpecsSystem Spec
22 Jan 2013   #65

Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Did you run startup repair 3 times already? After that boot normally and post bcdedit output. After that I gonna sleep.
Thanks for your help. I ran the startup repair 3 times. They did so without any errors, glitches or anything. Below is the AOMEI snip and the bcdeddit/enum all>bcd.txt snip.

Quote   Quote: Originally Posted by Kaktussoft View Post
If all went succesfull you have only 1 partition on disk and F8 recovery to "safe mode" and "repair your computer" work. Check that! Advanced Boot Options
Is this correct what the AOMEI snip shows?


Attached Thumbnails
What software to use with SSD clone and for backup too? Many Choices!!-capture-after-3-system-repairs.jpg  
Attached Images
 
My System SpecsSystem Spec
22 Jan 2013   #66

Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by LeftC View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
Did you run startup repair 3 times already? After that boot normally and post bcdedit output. After that I gonna sleep.

If all went succesfull you have only 1 partition on disk and F8 recovery to "safe mode" and "repair your computer" work. Check that! Advanced Boot Options
I'll run them later. Dinner is being served now. I'll have them done for you to take a look at.

I sure hope that things went as you planned.
Post results later please. If all went fine.... buy the stuff and attach to to system. Tell me when done. Then we continue to move OS to SSD.
The equipment is here. Tiny, tiny screws, going to be hard on these old, shaky hands.
My System SpecsSystem Spec
23 Jan 2013   #67

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by LeftC View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
Did you run startup repair 3 times already? After that boot normally and post bcdedit output. After that I gonna sleep.
Thanks for your help. I ran the startup repair 3 times. They did so without any errors, glitches or anything. Below is the AOMEI snip and the bcdeddit/enum all>bcd.txt snip.

Quote   Quote: Originally Posted by Kaktussoft View Post
If all went succesfull you have only 1 partition on disk and F8 recovery to "safe mode" and "repair your computer" work. Check that! Advanced Boot Options
Is this correct what the AOMEI snip shows?
AOMEI screenshot is fine. One large partition with unallocated space in front. Who cares about unallocated space?! If OS has been transfered and works without errors... you can delete partition OS on HDD. And then create any partition you want.

I don't see bcdedit output.

Code:
 
bcdedit/enum all>bcd.txt
notepad  bcd.txt
Now copy/paste the text in your post. close notepad and delete the file. I need readable text, so I can copy/paste and make eventually new commands to instruct you
My System SpecsSystem Spec
23 Jan 2013   #68

Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by LeftC View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
Did you run startup repair 3 times already? After that boot normally and post bcdedit output. After that I gonna sleep.
Thanks for your help. I ran the startup repair 3 times. They did so without any errors, glitches or anything. Below is the AOMEI snip and the bcdeddit/enum all>bcd.txt snip.

Quote   Quote: Originally Posted by Kaktussoft View Post
If all went succesfull you have only 1 partition on disk and F8 recovery to "safe mode" and "repair your computer" work. Check that! Advanced Boot Options
Is this correct what the AOMEI snip shows?
AOMEI screenshot is fine. One large partition with unallocated space in front. Who cares about unallocated space?! If OS has been transfered and works without errors... you can delete partition OS on HDD. And then create any partition you want.
Sounds great! So good, so far.

Quote   Quote: Originally Posted by Kaktussoft View Post
I don't see bcdedit output.

Code:
 
bcdedit/enum all>bcd.txt
notepad  bcd.txt
Now copy/paste the text in your post. close notepad and delete the file. I need readable text, so I can copy/paste and make eventually new commands to instruct you
I could not remember how to get it to copy to Notepad. The snip posted above that you probably can't identify is a bcdedit sans Notepad.

Anyway, below are the new bcdedit snips.


Attached Thumbnails
What software to use with SSD clone and for backup too? Many Choices!!-capture-bcdedit-1-notepad-1_23_2013.jpg   What software to use with SSD clone and for backup too? Many Choices!!-capture-bcdedit-2-notepad-1_23_2013.jpg  
My System SpecsSystem Spec
24 Jan 2013   #69

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by LeftC View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by LeftC View Post
Thanks for your help. I ran the startup repair 3 times. They did so without any errors, glitches or anything. Below is the AOMEI snip and the bcdeddit/enum all>bcd.txt snip.

Is this correct what the AOMEI snip shows?
AOMEI screenshot is fine. One large partition with unallocated space in front. Who cares about unallocated space?! If OS has been transfered and works without errors... you can delete partition OS on HDD. And then create any partition you want.
Sounds great! So good, so far.

Quote   Quote: Originally Posted by Kaktussoft View Post
I don't see bcdedit output.

Code:
 
bcdedit/enum all>bcd.txt
notepad  bcd.txt
Now copy/paste the text in your post. close notepad and delete the file. I need readable text, so I can copy/paste and make eventually new commands to instruct you
I could not remember how to get it to copy to Notepad. The snip posted above that you probably can't identify is a bcdedit sans Notepad.

Anyway, below are the new bcdedit snips.
bcdedit output looks fine. But still no F8 winre functionality!

In elevated command prompt:
Code:
reagentc/enable
Works? If so post bcdedit output again.

If not ... do you have file c:\windows\system32\recovery\winre.wim ?
My System SpecsSystem Spec
24 Jan 2013   #70

Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by LeftC View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
AOMEI screenshot is fine. One large partition with unallocated space in front. Who cares about unallocated space?! If OS has been transfered and works without errors... you can delete partition OS on HDD. And then create any partition you want.
Sounds great! So good, so far.

Quote   Quote: Originally Posted by Kaktussoft View Post
I don't see bcdedit output.

Code:
 
bcdedit/enum all>bcd.txt
notepad  bcd.txt
Now copy/paste the text in your post. close notepad and delete the file. I need readable text, so I can copy/paste and make eventually new commands to instruct you
I could not remember how to get it to copy to Notepad. The snip posted above that you probably can't identify is a bcdedit sans Notepad.

Anyway, below are the new bcdedit snips.
bcdedit output looks fine. But still no F8 winre functionality!

In elevated command prompt:
Code:
reagentc/enable
Works? If so post bcdedit output again.

If not ... do you have file c:\windows\system32\recovery\winre.wim ?
Sorry, I've been out of town.

Well shucks, doesn't work and I don't have winre.wim See snips below. I DO have winRe.wim See later replies.


Attached Thumbnails
What software to use with SSD clone and for backup too? Many Choices!!-capture-no-winre.wim-1_24_13.jpg  
My System SpecsSystem Spec
Reply

 What software to use with SSD clone and for backup too? Many Choices!!




Thread Tools



Similar help and support threads for2: What software to use with SSD clone and for backup too? Many Choices!!
Thread Forum
Solved My way to make / backup / image / clone / of W7-64 bootdisk Backup and Restore
Need new Hard Drive, choices, choices... Hardware & Devices
How to backup (clone) a complex partition HD ? Backup and Restore
Network backup choices. Network & Sharing
Is It Possible To Clone a Windows 7 Backup? Backup and Restore
Acronis TI 2010 - Clone Or Backup Image? Backup and Restore
HDD clone software Software

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:43 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33